ESP

This is an NB (no batteries) series kit which requires a 36 Volt battery pack to use. This kit is also Available With Batteries. This kit requires modifications to install. The battery pack, controller, motor, and reverse switch need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. With this kit the power switch is no longer wired in between the battery pack and controller, and there is an adapter...

This kit requires modifications to install. The battery pack, controller, and motor need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. This kit is available with a reverse switch as item # KIT-191.

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 18" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. Two pieces of 1/4” threaded...

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 18" This is a modification parts kit and requires custom installation of all parts. This is a no batteries (NB) kit. We also have this kit available With Batteries. The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The...

Toggle switches to controller/relay wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Controller to reverse relay wire length 12" Motor to reverse relay wire length 18" This is a modification parts kit and requires custom installation of all parts. The toggle switches have 48" of wire so they can be mounted on the front of the Dune Buggy if wanted. These wire lengths can be shortened on request. The vehicle must be at...

Toggle switches to controller/relay wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Controller to reverse relay wire length 12" Motor to reverse relay wire length 18" This is a modification parts kit and requires custom installation of all parts. This is a no batteries (NB) kit. We also have this kit available With Batteries. The toggle switches have 48" of wire so they can be mounted on the front of the Dune Buggy...

Throttle to controller wire length 60" Battery pack to controller wire length 18" Motor to controller wire length 18" Charger port wire length 20" The motor has an 11 tooth sprocket factory installed on it. An additional 13 tooth motor sprocket is included with this kit to increase the gear ratio and top speed. Two rear wheel sprockets are included with this kit. One wheel sprocket has 36 teeth and the other has 44 teeth. The power switch is on the throttle which makes turning the power on and...

Throttle to controller wire length 60"Battery pack to controller wire length 18"Motor to controller wire length 18"Charger port wire length 20" The power switch is on the throttle which makes turning the power on and off much easier than if using the original battery box mounted power switch. The throttle has battery indicator lights which light up when the power is on. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is...

Throttle to controller wire length 60" Battery pack to controller wire length 18" Motor to controller wire length 18" Charger port wire length 20" The motor has an 11 tooth sprocket factory installed on it. An additional 13 tooth motor sprocket is included with this kit to increase the gear ratio and top speed. Two rear wheel sprockets are included with this kit. One wheel sprocket has 36 teeth and the other has 44 teeth. The power switch is on the throttle which makes turning the power on and...

Throttle to controller wire length 60"Battery pack to controller wire length 18"Motor to controller wire length 18"Charger port wire length 20" The power switch is on the throttle which makes turning the power on and off much easier than if using the original battery box mounted power switch. The throttle has battery indicator lights which light up when the power is on. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is...

Toggle Switch to Controller wire length 48"Throttle to Controller wire length 48"Battery Pack to Controller wire length 24"Charger Port to Controller wire length 24"Motor to Controller wire length 18" The toggle switch has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. This is a modification...

Toggle switches to controller wire length 59"Throttle to controller wire length 59"Voltmeter to controller wire length 59"Battery pack to controller wire length 24"Charger port wire length 20"Controller to reverse relay wire length 12"Motor to reverse relay wire length 18" The toggle switches and Voltmeter have 59" of wire so they can be mounted in the front of the Dune Buggy if wanted. This wire length can be changed on request. The chain with master link in this kit is oversized and will...