ESP

Made with 12 gauge wire.

2 Pin Red Wire Connector Extension Cord with 12 Gauge Wires Choose the length of this extension cord in the "Choose Your Options" section above.

24 Volt 100-150 Watt Controller and Throttle with Power Switch Electric Scooter Kit The red push-button switch on the throttle is the on-off power switch.This is a variable speed kit and the throttle controls the motor speed from 0-100% and everywhere in between.The only connections that need to be made with this kit are the thick yellow and blue wires to the motor, the thick red and black wires to the battery pack, the charger port, and the throttle to the controller. All other connectors are...

24 Volt 1000 Watt Controller and Throttle with Key Switch and Battery Indicator Kit The throttle has connectors (not shown) that are plug-and-play with the controller. The controller and throttle connectors are labeled so they can be assembled without any guesswork. The throttle includes a matching left hand grip.

This kit is made for American Engines PedalPower Cycle Chair Tricycles that have their original motor. This kit does not include a motor. This is a modification kit that requires custom installation of all parts. The installer needs to have good electrical wiring skills and an understanding of how to custom install electrical parts to be able to safely install this kit.If the Cycle Chair has a hoop style handlebar then it will need to be replaced with a high rise bicycle handlebar to be able...

24 Volt 12Ah Battery Pack with Fabric Case and Wiring Harness Fits the following makes and models: Columbia TX-450 Electric ScootereZip 650 and E-650 Electric Scooter eZip 750 and E-750 Electric Scooter eZip 900 and E-900 Electric Scooter IZIP I-750 Electric Scooter (24 Volt Version) Schwinn S-750 Electric Scooter *(24 Volt Version with 12Ah Batteries) * Not compatible with Schwinn S-750 24 Volt version with 10Ah batteries. ...

24 Volt 150-250 Watt Controller and Throttle with Power Switch Electric Scooter Kit The red push-button switch on the throttle is the on-off power switch.This is a variable speed kit and the throttle controls the motor speed from 0-100% and everywhere in between.The only connections that need to be made with this kit are the thick white and blue wires to the motor, the thick red and black wires to the battery pack, the charger port, and the throttle to the controller. All other connectors are...

24 Volt 250 Watt Controller and Throttle with Power Switch Electric Scooter Kit The red push-button switch on the throttle is the on-off power switch.This is a variable speed kit and the throttle controls the motor speed from 0-100% and everywhere in between.The only connections that need to be made with this kit are the thick yellow and blue wires to the motor, the thick red and black wires to the battery pack, the charger port, and the throttle to the controller. All other connectors are...

We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.

Axle sprockets and hubs which are compatible with this kit's motor sprocket and chain are available on these pages: Freewheel Axle Sprockets and Hubs for Bicycle Chain Fixed Axle Sprockets and Hubs for Bicycle Chain

This is a No Batteries (NB) kit which includes a battery pack wiring harness with push on terminals for batteries with 1/4" (6.2mm) wide tab terminals (F2 terminals). We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. With a one person vehicle a 250 Watt motor is suitable for a top speed gearing of 15 MPH on flat ground only and if the vehicle will need to travel up grades up to 5% or through grass or dirt then the top...

We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.