ESP

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.

The two gear motors in this kit have clockwise shaft rotation and should be used with clockwise shaft rotation for best performance. When these gear motors are run counterclockwise their shaft speed will be slower then when run clockwise, so we recommend installing both motors so they run clockwise when the vehicle is moving forward. Due to the weight of the large batteries and other heavy parts this kit weighs around 160 pounds.

Features: This kit's speed controller operates motor in clockwise direction only and the direction is not reversable. Wire Lengths: Throttle to controller wire length 60"Controller to junction box wire length 6"Motor to junction box wire length 24"

We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.

Wire Routing ChartThe Controller to Power Relay wires are approximately 6 Inches long. Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. Details about this kit: This is a modification kit which may require creating a place of the Rhoades car to mount the kit's parts to. The motor rotates clockwise so it needs to be mounted in a position that allows the car to move forward when the motor rotates clockwise. We install matching connectors on every part of...

Wire Routing Chart The Controller to Power Relay wires are approximately 6 Inches long.Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. Details about this kit: This is a modification kit which may require creating a place of the Rhoades car to mount the kit's parts to. The motor rotates clockwise so it needs to be mounted in a position that allows the car to move forward when the motor rotates clockwise. We install matching connectors on every part of...

Wire Routing Chart The Controller to Power Relay wires are approximately 6 Inches long.Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. Details about this kit: This kit does not include a 48 Volt battery pack or battery charger. However, we can make a new version of this kit with a battery pack and battery charger on request.This Rhoades car kit has reverse while most of our other Rhoades car kit do not have reverse. The downside of having reverse is...

Select Sprocket, Chain, and Wire Length Options in the Choose Your Options Box The motor in this kit has an 11 tooth sprocket for 8mm chain installed onto it. We have wheel and axle sprockets for 8mm, #25, #35, #410, and #420 chain plus sprocket to axle adapters which are compatible with this kit. Click below to view our full selection of sprockets, adapters, and chains. Sprockets and Adapters Chains ...

4 Pin XLR Charger Port with 2 Wires and 2 Terminal Connector OEM Currie Tech (eZip and IZIP) Battery Charger PortCurrie Part # BA-071-10Positive (Red Wire) Goes To XLR Port # 1Negative (Black Wire) Goes To XLR Port # 2

The controller can be programmed to run the motor in the clockwise or counterclockwise direction. A switch can be wired to the controller to activate its reverse feature. The red push-button switch on the throttle is wired as the on-off power switch. This kit contains the following parts and labor (click below for details):

Adapter To Make BAT-RAZ2 Work On Razor Products That Use BAT-RAZ1 This adapter solves the problem of having a BAT-RAZ2 battery pack when a BAT-RAZ1 battery pack is needed.Easy plug-and-play installation. Plugs in between the battery pack and controller.

Select Chain and Wire Length options in the Choose Your Options box above. The motor in this kit has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with the kit. If you need #35 chain then it can be selected in the Choose Your Options box above. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...