ESP

Toggle Switches to Controller wire length 48" Throttle to Controller wire length 48" Battery Pack to Controller wire length 24" Charger Port to Controller wire length 24" Controller to Reverse Relay wire length 12" Motor to Reverse Relay wire length 18" The toggle switches have 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct...

Toggle Switches to Controller wire length 48"Throttle to Controller wire length 48"Battery Pack to Controller wire length 24"Charger Port to Controller wire length 24"Controller to Reverse Relay wire length 12"Motor to Reverse Relay wire length 18" The toggle switches have 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The master link in this kit is oversized and will need to be shortened to the correct length after the...

36 Volt 1000 Watt SPD-CT660B9 Controller and THR-68 Throttle Kit We install a connector on the throttle that plugs into the controller so everything is properly wired and works together.

36 Volt 1000 Watt SPD-CT660B9 Controller and THR-86 Throttle Kit We install a connector on the throttle that plugs into the controller so everything is properly wired and works together.

36 Volt 1000 Watt Throttle, Controller, Battery Pack Wiring Harness, and Charger Port Kit All parts will have matching and labeled connectors on then for easy plug-and-play installation. Includes all necessary electrical parts except for the batteries, motor, and battery charger. The red push button switch on the throttle is the on/off power switch. The throttle has a battery level indicator which lights up when the power switch is on. ...

Wire Routing Select the wire lengths of the kit above. Shipping weight 185 pounds. The motors in this kit rotate in the clockwise direction and they have forward brush timing so they both need to rotate in the same direction to have equal speeds and power outputs. We have wheel and axle sprockets, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need more sprockets or chain? Click below to view our full selection of sprockets and chains....

Wire Routing Select the wire lengths of the kit above. The motors in this kit rotate in the clockwise direction and they have forward brush timing so they both need to rotate in the same direction to have equal speeds and power outputs. We have wheel and axle sprockets, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need more sprockets or chain? Click below to view our full selection of sprockets and chains. Sprockets Chains ...

36 Volt 500 Watt Controller and Throttle with Key Switch and Battery Indicator Kit The only connections that need to be made with this kit are the thick yellow and blue wires to the motor, and the thick red and black wires to the battery pack. All other connectors are optional and do not need to be connected to anything for the controller to operate. The throttle has connectors that are wired to work with the controller. The controller and throttle connectors are labeled so they can be...

The throttle has a key switch which is the on/off power switch for the system. The throttle also has a battery level indicator which lights up when the power is on.Throttle to Controller wire length 64"Battery Pack to Controller wire length 24"Charger Port to Controller wire length 24"Motor to Controller wire length 18"

Wire Routing Chart Select the wire lengths of the kit above.

36 Volt 600 Watt Beach Wagon Power Kit

Battery pack wiring harness terminals are 1/4" ID ring terminals.Battery pack to controller wire length 18 inches.Motor to controller wire length 18 inches.Charger port to controller wire length 18 inches.Throttle to controller wire length 46 inches. Battery pack wiring harness terminal type and wire lengths can be changed on request. This kit's battery pack wiring harness has 5mm ID ring terminals. If you need this kit to have a battery pack wiring harness with 1/4" push-on terminals then...