ESP

Wire Routing Chart We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. If the handlebar switch option is selected then the handlebar switch will replace the toggle switch in the kit. The motor has a 10-tooth sprocket for #420 chain. #420 chain with master link options are available in the Choose Your Options area. The shipping weight of this kit is 90 pounds. Need more sprockets or chain? Click below to view our full...

Wire Routing Chart 24 Volt 650 Watt Electric Tricycle, Scooter, or Beach Wagon Power Kit Select the wire lengths of the kit above.

24 Volt 750 Watt XYD-6B Motor, 24 Volt 1000 Watt Controller, and Twist Throttle Kit We install matching connectors on every part of this kit and label them so installation will be plug-and-play. The MOT-SD175 motor's shaft spins counter clockwise if you are facing the shaft. This shaft rotation is reversible by reversing motor to controller wire polarities.

24 Volt Battery Pack with Fabric Case and Wiring Harness Two 12 Volt batteries (24 Volt battery pack) in fabric case with plug-and-play wiring harness. Compatibility: eZip E-400 Electric ScootereZip E-450 Electric ScootereZip E-500 Electric ScooterGT Asteroid Electric ScooterGT GT-200 Electric Scooter (2005 and Older Models)GT GT-250 Electric ScooterGT GT-300 Electric ScooterGT GT-350 Electric ScooterGT GT-500 Electric ScooterGT Kobra.08 Electric ScooterGT Shockwave Electric ScooterGT Trailz...

Made with 12 gauge wire.

3 Pin Round Battery Charger Port with XT30 Connector Yellow XT30 connector. Compatibility: Grace 8, 9, 10 Electric Scooter Joyor G5, S5, S10-S, Y10 Electric Scooter Kugoo M4 Electric Scooter Speedual, Speedual Mini, Speedual Plus Electric Scooter VSETT 8, 8+, 9, 9+, 10+ Electric Scooter ZERO 8, 9, 10, 8X, 10X, 11X Electric Scooter Plus many other makes and models. ...

3-Terminal Female Jumper Plug with Jumpered Terminals 1 and 2 Used on some speed controllers with 3-speed switch option to permanently select a speed option without the need for a switch. Terminals 1 and 2 are jumpered together. Female connector plug housing with 2.8mm male terminals. Known Compatibility: SPD-482000BLDC-A Controller (for selecting the high speed option) SPD-482000BLDC-B Controller (for selecting the high speed option) ...

36 Volt 1000 Watt Controller and Throttle with Key Switch and Battery Indicator Kit The only connections that need to be made with this kit are the thick yellow and blue wires to the motor, and the thick red and black wires to the battery pack. All other connectors are optional and do not need to be connected to anything for the controller to operate. The throttle has connectors that are wired to work with the controller. The controller and throttle connectors are labeled so they can be...

Wire Routing The motor in this kit has an 11-tooth motor sprocket for #420 chain and a 9-tooth sprocket for #420 chain is included with the kit. We carry axle sprockets and axle sprocket hubs for #420 chain that are compatible with this kit. This kit does not include a battery pack. Since this kit has a forward-reverse switch it can not be used with a freewheel and it needs to be used with an axle sprocket hub. Need a sprocket and axle sprocket hub? Click below to view our full selection of...

Wire Routing The motor in this kit has an 11-tooth motor sprocket for #420 chain. We carry axle sprockets and axle sprocket hubs for #420 chain that are compatible with this kit.This kit does not include a battery pack, charger, or charger port. Since this kit has a forward-reverse switch it can not be used with a freewheel and it needs to be used with an axle sprocket hub.  Need a sprocket and axle sprocket hub? Click below to view our full selection of these parts. Sprockets ...

36 Volt 1000 Watt Electric Go Kart and Scooter Power Kit with Reverse