ESP

Wire Routing The motor in this kit has an 10 tooth sprocket for #420 chain. We have wheel and axle sprockets and axle adapters for #420 chain which are compatible with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

24 Volt 500 Watt Electric Go Kart Power Kit with Reverse This kit includes a Throttle Top Speed Adjustable Limiter which can be used to lower the motor's power output for top speed regulation or driver training purposesThe go kart needs to be at a complete stop before switching from forward to reverse, or from reverse to forward, otherwise, the controller may become permanently damaged. We do not recommend this kit for use with younger children who may be tempted to switch directions while the...

Charger Port for Razor MX125 Electric Dirt Bike Fits the following Razor models: MX125 Dirt Bike

Select Chain and Wire Length options in the Choose Your Options box above. The motor in this kit has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with the kit. If you need #35 chain then it can be selected in the Choose Your Options box above. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or additional chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. SprocketsAxle Sprocket Hubs Chains ...

This is a No Batteries (NB) kit which includes a battery pack wiring harness with push on terminals for batteries with 1/4" (6.2mm) wide tab terminals (F2 terminals). We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. With a one person vehicle a 250 Watt motor is suitable for a top speed gearing of 15 MPH on flat ground only and if the vehicle will need to travel up grades up to 5% or through grass or dirt then the top...

Brushless Motor Replacement Kit with 350 Watt Motor for Currie, GT, Mongoose, and Schwinn Electric Scooters Replaces 24 Volt brushless motors with 15 tooth freewheel sprockets on older versions of Currie, GT, Mongoose, and Schwinn electric scooters. Upgrades older scooters to have the more reliable brushed type of motor with external speed controller and upgraded throttle. Plug-and-play installation. Direct replacement kit for scooters with brushless motors. No cutting and splicing of wires is...

Chain with Master Link for Razor RSF350 Electric Sport Bike View All Razor RSF350 Parts

This is a No Batteries (NB) kit. This kit is also available With Batteries. This is not a bolt-and-go kit. This is a modification kit that requires custom installation of the motor and speed controller. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All...

Kit Warning: Our item # MOT-481000 and MOT-481000B 48 Volt 1000 Watt motors are too long to fit in the MX500, MX650, and SX500 frame and would require metal fabrication and welding to install. Our item # MOT-48750 48 Volt 750 Watt motor fits in the MX500, MX650, and SX500 frame and is suitable to use with this kit. This kit is sometimes used to overvolt the MX500, MX650, and SX500 dirt bike's original 36 Volt motor, however, depending on riding conditions overvolting the original motor may...

Battery Wiring Harness with 10 AWG Wire for 24 Volt Battery PackMade with 10 AWG stranded copper automotive grade wire.This is a custom-made part so please allow around 3-5 business days for production and outbound shipping. 

The red push button switch on the throttle is wired as the on/off power switch.The motor's shaft and sprocket rotate clockwise so the motor needs to be installed in a position where its shaft and sprocket rotate clockwise when the cart is moving forward. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need...