SH

Shares With / Same As CBL-150

47 Tooth Sprocket for #25 Chain 3-7/8" OD2-1/8" IDF4 mounting pattern. 1/4" (6.2mm) bolt hole ID. Bolts directly onto our 4-hole and 16-tooth freewheel clutches.

For #25 and #25H chain. 47 teeth. 3-7/8" OD. R34 mounting pattern. 29.1mm (1-1/8") ID. 39mm bolt circle diameter. Three 6.2mm (1/4") ID bolt holes. Adjacent bolt holes are spaced 33.77mm center to center distance apart from each other.Made from steel with a zinc-plated finish. 

47 Tooth Rear Sprocket For #25 Chain98mm OD29mm ID4 Bolt Holes6.5mm ID Bolt Holes27mm Adjacent Bolt Hole Center To Center DistanceFits Razor E100 Series Scooters (+ Many Others)

48 Volt 1.6 Amp Automatic Battery Charger with 3-Pin XLR Plug For 48 Volt lead-acid battery packs.

48 Volt 1.6 Amp Automatic Battery Charger With 3-Port House Plug For 48 Volt lead-acid battery packs.

48 Volt 1.6 Amp Automatic Battery Charger With 3-Port Inline Plug For 48 Volt lead-acid battery packs. Compatibility: Euro Scooter, Old Style Roma Version (verify plug is the same before ordering)Plus many other makes and models.

48 Volt 1000 Watt Electric Scooter Motor 48V 1000W electric scooter, go kart, and pocket bike motor.Motor speed: 3000 RPM.Powerful four brush permanent magnet design with 100% ball bearing construction. 24" long power leads. Shaft rotation reversible by reversing power leads. Includes factory installed 11 tooth sprocket for 8mm chain. Different size sprockets are available for this motor.Motor shaft starts at 12mm OD and is stepped down to 10mm OD with two flat spots that are 8.5mm apart where...

48 Volt 1000 Watt Electric Scooter Motor 48V 1000W electric scooter, go kart, and pocket bike motor with mounting base. Motor speed: 3000 RPM. Powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 24" long power leads. Shaft rotation reversible by reversing power leads. Includes factory installed 11 tooth sprocket for 8mm chain.Different size sprockets are available for this motor.Motor shaft starts at 12mm OD and is stepped down to 10mm OD with two...

48 Volt 1000 Watt Electric Tricycle Brushless Gear Motor 48 Volt 1000 Watt brushless DC (BLDC) gear motor.Dimensions: 13.7" (347.2mm) long x 6.85" (174mm) wide including the mounting base.22mm OD output shaft with keyway.Includes key and mounting nut with lock washer for the sprocket.Compatible with SPR-42816R2 Motor Sprocket. Specifications Voltage: 48VPower: 1000WRated Current: 26AOutput Shaft Speed: 650 RPM 1. The signal cable length is 35" (900mm) and the phase wire lengths are 7.87"...

48 Volt 1000 Watt Planetary Gear Motor with Cooling Fan 48V 1000W electric bicycle, tricycle, and go-kart motor with built-in planetary gear reduction transmission. Output shaft speed 500 RPM. Shaft diameter where sprocket seats into is 12mm x 17mm with a dual D-bore. Includes 11 tooth sprocket for #41 and #420 chain (both of these chain sizes work with this sprocket). Different size sprockets are available for this motor. Powerful four-brush permanent magnet design with 100% ball bearing...

48V 1000W Speed Controller with Reverse Reversible speed controller operates in either forward or reverse mode. Designed for 48 Volt motors up to 1000 Watts.Maximum current 40 Amps.Under Voltage protection 42 Volts.Current limiting feature helps prevent controller and motor damage due to over-current conditions.Under voltage protection feature helps prevent over-discharge and extends the life of the battery pack.Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions...