SH

35 Tooth Rear Sprocket for T8F (8mm) Chain 93mm (3.67") OD, 29.1mm (1.15") ID, 4mm thick. 3 bolt mounting pattern. 6.2mm ID bolt holes. Mounting bolt holes are spaced 33.77mm (1.33") apart from center to center. 39mm bolt circle diameter. Made from steel with a zinc-plated finish. R34 mounting pattern.

Full Length Twist Throttle with 24 Volt Power Meter Twist throttle with 24 Volt battery power indicator. Includes matching left-hand handlebar grip. The indicator has three LED battery indicator lights which are; red for power-on and battery low, green for battery medium, and green for battery high. 64" long throttle cable. Red, blue, green, and yellow wires with 2.8mm wide male terminals for white wire connectors. Wiring Directions ...

Half Length Twist Throttle with Key Switch and 0-99 Volt Red LED Power Meter Half twist throttle with key switch and 0-99.9 Volt red LED digital battery level indicator. Key is removable in the off position only. Includes matching grip set for left and right sides of the handlebar. 62" long throttle cable. Red, black, green, blue, and yellow wires with 2.8mm male terminals Wiring Directions ...

Full Length Twist Throttle with Key Switch and 0-99 Volt Red LED Power Meter Full twist throttle with key switch and 0-99.9 Volt red LED digital battery level indicator. Key is removable in the off position only. Includes matching grip set for left and right sides of the handlebar. 62" long throttle cable. Red, black, green, blue, and yellow wires with 2.8mm male terminals. Wiring Directions ...

18x2.50 Street Tread Electric Scooter and E-Bike Tubeless Tire All-Terrain tread 18x2.50 (18x2.5) / 64-355 electric scooter, moped, and e-bike tire. Tubeless tire. (Tubeless tires can be used with an inner tube on scooters and bikes which require tubes.)This is a heavy-duty 6 ply-rated (6 P.R.) tire that weighs 4.1 pounds and has a rubber thickness of 6mm (~1/4").  ...

18x3.0 Street Tread Electric Scooter and E-Bike Tire 18x3.0 (18x3) electric scooter, moped, and e-bike tire.Tube-type tire (not a tubeless tire).  Has small knobs on side treads for improved traction during cornering. Inflation 35-45 PSI.We carry an 18x3.0 Inner Tube for this tire. We carry an 18 Inch Rim Strip for this tire. ...

18x3.0 Inner Tube with Bent Valve Stem 18x3.0 (18x3) inner tube with 45-degree bent valve stem.We carry an 18x3.0 Tire for this inner tube.We carry an 18 Inch Rim Strip for this inner tube.

16 Tooth D-Bore Drive Belt Cog for 5M/15 Belts 8mm x 7mm ID D-bore. 18mm overall length. Works with 5mm tooth pitch x 15mm wide (***-5M/15) HTD Drive Belts.

5" Rear Suspension Shock Absorber, 450 LBS/IN Spring Tension Adjustable rear suspension shock absorber for electric scooters, bikes, and go-karts. Includes mounting hardware.Dimensions: 5" Long x 1-3/4" WideCenter to Center Distance Between Mounting Bolts: 4-1/4" (125mm)Mounting Bolt Hole Diameter: 8mmUpper and Lower Mount Width: 24mmSpring Tension: 450 LBS/IN

Freewheel to Axle Adapter with M35x1.0 Right Hand Threads for 24mm Axle M35x1.0 Clockwise (Right Hand) Threads 24mm ID Threaded for an M8 (8mm) Setscrew (Included) No Keyway Most commonly used on electric three-wheel vehicles such as rickshaws and cargo tricycles. Works with our Freewheels that have M35x1.0 clockwise (CW) threads. Why Is This Part On Our Specials Page? This freewheel to axle adapter does not meet our normal standards of quality so we can not list it on our freewheel to axle...

24 Volt Turn Signal Flasher Relay 24V turn signal flasher for electric scooters and bikes. Why Is This Part On Our Specials Page? We now get this part with different color wires so we do not list it on our turn signal flashers page. These flashers are brand new and in perfect condition. ...

36-72 Volt DC to 12 Volt DC 20A DC-DC Voltage Converter Electric scooter, moped, and e-bike DC to DC converter. Converts 36V, 48V, 60V, or 72V DC down to 12 Volts DC. Maximum input Voltage 100V DC.Output Voltage 13.8V DC ±0.2V Maximum output current 20 Amps. Runs 12 Volt DC lights, horns, and accessories off of higher DC Voltages. Dimensions Case not including mounting tabs 4-7/8" long x 2" wide x 1-7/16" high Case including mounting tabs 5-7/8" long x 2" wide x 1-7/16" high Wire length 3.5"...