SH

36 Volt 1.6 Amp Automatic Battery Charger with 3-Port Inline Plug For 36 Volt lead-acid battery packs. Compatibility:TaoTao E1-500 Electric ATVPlus many other makes and models.

36 Volt 1.6 Amp Automatic Battery Charger with 4-Pin XLR Plug For 36 Volt lead-acid battery packs.

36 Volt 1.6 Amp Automatic Battery Charger with Coaxial Plug For 36 Volt lead-acid battery packs.

36 Volt 1.6 Amp Automatic Battery Charger with RCA Plug For lead-acid battery packs. Universal 100-240 Volt AC power input. Charger has RCA output plug.

36 Volt 1000 Watt Currie Electric Scooter Motor with 15 Tooth Freewheel Sprocket Specifications: 36V (DC36V), 1000W, 2600 RPM (R/MIN), 32A, Front Mount Rated Current: 32A Model: XYD-14A (Use model plus specifications to determine compatibility.) Powerful four brush permanent magnet design with 100% ball bearing construction. Finned aluminum case. Made with extremely powerful and lightweight neodymium magnets. 15 tooth freewheel sprocket for #25 chain.25" long power leads with connector at end....

36 Volt 1000 Watt Currie Electric Scooter Motor with 11-Tooth Sprocket Specifications: 36V (DC36V), 1000W, 2600RPM (R/MIN), 32A, Front Mount Rated Current: 32A Model: XYD-14A (Use model plus specifications to determine compatibility.) 11-tooth sprocket for #25 chain. Powerful four-brush permanent magnet design with 100% ball bearing construction. Finned aluminum case. Made with extremely powerful and lightweight neodymium magnets. 25" long power leads with connector at end. 3 bolt mounting...

36 Volt 1000 Watt Electric Scooter Motor 36V 1000W 3000 RPM electric scooter motor. Powerful four brush permanent magnet design with 100% ball bearing construction. 15" long power leads. Shaft rotation reversible by reversing power leads. Includes factory installed 11 tooth sprocket for 8mm chain. Different size sprockets are available for this motor. Motor shaft starts at 12mm OD and is stepped down to 10mm OD with two flat spots that are 8.5mm apart where the sprocket mounts, past the...

36 Volt 1000 Watt Electric Scooter Motor 36V 1000W 3000 RPM electric scooter motor. Powerful four brush permanent magnet design with 100% ball bearing construction. 18" long power leads. Shaft rotation reversible by reversing power leads. Includes factory installed 11 tooth sprocket for 8mm chain.  Different size sprockets are available for this motor. Dimensions: 4-1/4" wide x 6" long excluding shaft, 7" long including shaft. Mounting bracket measures 4-3/4" x 2-7/8" and has 4 holes that...

36 Volt 1000 Watt Motor with Gearbox and Axle for eZip and IZIP 1000 Series Direct Drive Electric ScootersFits the following makes and models: eZip 1000 and E-1000 IZIP 1000 and I-1000 Schwinn Stealth 1000, S1000, and ST-1000 with 15mm Axle Included wire and wire connector (not shown in photo). Compatible only with 1000 series scooters that have a direct drive gearbox transmission. Dimensions PDF Important Information: For Schwinn 1000 series scooters with 15mm rear wheel axle only. Does not...

36 Volt 1000 Watt Planetary Gear Motor with Cooling Fan 36V 1000W electric bicycle, tricycle, and go-kart motor with built-in planetary gear reduction transmission and cooling fan. Motor speed 3000 RPM. Gear ratio: 6:1 Output shaft speed 500 RPM. Shaft diameter where sprocket seats into is 12mm x 17mm with a dual D-bore. Includes 11 tooth sprocket for #41 and #420 chain (both of these chain sizes work with this motor's sprocket). Powerful four brush permanent magnet design with 100% ball...

36V 1000W Electric Scooter and Bike Speed Controller Designed for 36 Volt motors up to 1000 Watts.Maximum current 32 Amps.Under Voltage protection 31 Volts.Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge of the battery pack and extends battery life.Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions Plug-and-Play Compatible Throttles: THR-86-C1 36 Volt Half Twist...

36 Volt 150 Amp Motor Reversing Contactor 36 Volts (36V) DC 150 Amp (150A) Contacts Coil power consumption 8 Watts. Has no-load rated make or break contacts so it needs to be used with a speed controller and the vehicle should be stopped before switching between forward, park, and reverse directions. Applies electronic braking to the motor when the switch is in the park position which helps prevent damage to the controller in the event of accidentally switching directions when the vehicle is...