SH

24V 450W Speed Controller for Columbia, Currie, eZip, IZIP, and Schwinn Electric Scooters Designed for 24 Volt motors up to 450 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters up to 450 Watts that have between 3 and 5 connectors...

24V 500W Speed Controller Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric scooter and bicycle models. Item # SPD-24500Wiring...

24VDC 900W 34A 2600RPM Motor Currie Electric Scooter Motor with 11 Tooth Sprocket Specifications: 24V (DC24V), 900W, 2600RPM (R/MIN) Model: XYD-13 (Use model plus specifications to determine compatibility.)Made with powerful neodymium magnets. 11 tooth sprocket for #25 chain. Powerful four brush permanent magnet design with 100% ball bearing construction. Shaft rotation spins Counter Clockwise if you are facing the shaft. Shaft rotation reversible by reversing power leads.OEM Currie electric...

CBL-020, 25 Inch Brake Cable With 20 Inch Black Cable Housing

28 Tooth Sprocket for #41 and #420 Chain with F8 Mounting Pattern F8 Sprocket Mounting Pattern 28 Tooth Steel Sprocket for #41 and #420 Chain 64.5mm ID 80mm Bolt Circle Diameter 56.5mm Adjacent Bolt Hole Center to Center Spacing Four 8.5mm ID Bolt Holes We have a Sprocket to Freewheel Nut and Bolt Set available for this sprocket. ...

3 Pin Battery/Motor Connector Set With Pins (CNX-150)

3 Pin Black Throttle/Speed Controller Wire Connector Set With Pins (CNX-63)

3 Pin Throttle/Speed Controller Connector Set with Pins

3 Pin Black Nylon XLR Charger Port with 3 Wires and 3 Terminal Connector Black nylon 3 pin XLR electric scooter/bike battery charger port with three wires and three terminal connector. For Currie, Schwinn, GT, Mongoose, eZip, and IZIP electric scooters.

Half Length Twist Throttle Standard half length throttle. Fits 7/8" (22mm) handlebars. Wire colors: red, black, and white. 62" long throttle cable with male terminals for white wire connectors. The most common connector used with this throttle is CNX-52. Wiring Directions ...

TIR-3.00-4S, 3.00-4 (10x3.00-4) Knobby Tread Scooter Tire (TIR-3.00-4K)