SH

Half Length Twist Throttle Standard half length throttle. Fits 7/8" (22mm) handlebars. Wire colors: red, black, and white. 62" long throttle cable with male terminals for white wire connectors. The most common connector used with this throttle is CNX-52. Wiring Directions ...

TIR-3.00-4S, 3.00-4 (10x3.00-4) Knobby Tread Scooter Tire (TIR-3.00-4K)

TIR-3.00-4, 3.00-4 (10x3.00-4) Street Tread Scooter Tire

Quick release nickel-plated steel seat post clamp for 25.4mm (1") OD seat posts. Inside diameter of clamp is adjustable between 30mm (1-3/16") and 28mm (1-1/16").

34 Tooth Sprocket for #41 and #420 Chain with F8 Mounting Pattern F8 Sprocket Mounting Pattern 34 Tooth Steel Sprocket for #41 and #420 Chain 64.5mm ID 80mm Bolt Circle Diameter 56.5mm Adjacent Bolt Hole Center to Center Spacing Four 8.5mm ID Bolt Holes We have a Sprocket to Freewheel Nut and Bolt Set available for this sprocket. ...

35 Tooth Rear Sprocket for T8F (8mm) Chain 93mm (3.67") OD, 29.1mm (1.15") ID, 4mm thick. 3 bolt mounting pattern. 6.2mm ID bolt holes. Mounting bolt holes are spaced 33.77mm (1.33") apart from center to center. 39mm bolt circle diameter. Made from steel with a zinc-plated finish. R34 mounting pattern.

36 Tooth Sprocket for 8mm Chain F4 mounting pattern.95mm (4") OD, 54mm (2-1/8") ID. 4mm thick. 4 bolt mounting pattern. Adjacent mounting bolt holes are spaced 47mm (1-3/8") apart from center to center. Made from steel with a tough black enamel finish. Bolts directly onto 4 hole rear wheel freewheel clutches.

36 Volt (Marked 40V) 10W Stop or Tail Light Bulb (BLB-3610C)

36 Volt 1.6 Amp Automatic Battery Charger with 2-Port Inline Plug For 36 Volt lead-acid battery packs.

36 Volt 1.6 Amp Automatic Battery Charger with 3-Pin XLR Plug For 36 Volt lead-acid battery packs. Compatibility: eWheels EW-18 Stand-N-Ride 3-Wheel Electric Scooter Plus many other makes and models.

36 Volt 1.6 Amp Automatic Battery Charger with 3-Port House Plug For 36 Volt lead-acid battery packs.