ESP

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" The Dune Buggy's original battery charger will work with this kit. The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed....

Throttle to Controller wire length 48" Battery Pack to Controller wire length 24" Charger Port Adapter to Controller wire length 24" Motor to Controller wire length 18" The original power switch, battery charger, and charger port are reused with this kit. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. This is a modification parts kit and requires custom installation. ...

Throttle to Controller wire length 64" Battery Pack to Controller wire length 24" Charger Ports to Batteries wire length 24" Motor to Controller wire length 18" This kit requires two battery chargers, one for each battery. Battery chargers are not included with this kit. Click here for this same kit with battery chargers included. The red push button switch on the throttle is the on/off power switch. The chain with master link in this kit is oversized and will need to be shortened to the...

Warning: The go-kart needs to be at a complete stop before switching from forward to reverse or from reverse to forward. If the direction is switched while the go-kart is moving then the speed controller will stop working. There is no warranty on the speed controller so if this happens then it will need to be replaced at your expense. For this reason, we do not recommend this kit for children to use. For children, we recommend our 24 Volt 500 Watt kit without reverse, our 36 Volt 1000 Watt kit...

Warning: The go-kart needs to be at a complete stop before switching from forward to reverse or from reverse to forward. If the direction is switched while the go-kart is moving then the speed controller will stop working. For this reason, we do not recommend this kit for children to use. For children, we recommend our 24 Volt 500 Watt kit without reverse, our 36 Volt 1000 Watt kit with reverse, or our 48 Volt 1000 Watt kit with reverse. Our 1000 Watt kits with reverse have a heavy duty...

Warning: The go-kart needs to be at a complete stop before switching from forward to reverse or from reverse to forward. If the direction is switched while the go-kart is moving then the speed controller will stop working. There is no warranty on the speed controller so if this happens then it will need to be replaced at your expense. For this reason, we do not recommend this kit for children to use. For children, we recommend our 24 Volt 500 Watt kit without reverse, our 36 Volt 1000 Watt kit...

Razor Ground Force Drifter 500 Watt Modification Kit without Reverse This kit requires frame modifications including a larger battery tray and motor mounting plate. The chain included with this kit is longer than needed and will have to be shortened to the correct length after the motor is installed.

Throttle to Controller wire length 48" Battery Pack to Controller wire length 24" Charger Port to Controller wire length 24" Motor to Controller wire length 18" The original power switch and charger port are reused with this kit. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. This is a modification parts kit and requires custom installation of all parts. ...

24 Volt 500 Watt Reversing Controller with Handlebar Mount Reverse Switch KitThis kit's reverse switch will have a connector on it that plugs directly into the controller.Plug-and-play direct replacement controller for item # SPD-24500B.The vehicle must be at a complete stop before switching from forward to reverse, or reverse to forward. Operating the reverse switch while the vehicle is in motion may permanently damage the controller.

Wire Routing Chart We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. Choose the wire length options above.The motor in this kit has a 10-tooth sprocket for #420 chain. The switch on the throttle is the on-off power switch and the panel mount rocker switch is the reverse switch. Need sprockets or chain? Click below to view our full selection of sprockets and chains including custom-made wheel and axle sprockets. Sprockets...

Wire Routing Chart This kit was originally made for converting a gas engine powered DR Powerwagon self-propelled wheelbarrow to electric power, however, it can be used for powering beach wagons and carts or anything that needs to run at a slow speed and have a lot of power. #420 chain with master link options are available in the Choose Your Options area. We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. The throttle in...

Wire Routing Chart This kit was originally made for converting a gas engine powered DR Powerwagon self-propelled wheelbarrow to electric power, however, it can be used for powering beach wagons and carts or anything that needs to run at a slow speed and have a lot of power. #420 chain with a master link options are available in the Choose Your Options area. We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. The throttle in...