ESP

The key switch on the throttle is wired as the bike's main on-off power switch. The bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at a reduced power level for slower speeds and a longer range and ride-time. This modification kit requires custom installation (mounting) of the battery (battery not included) and the controller. The motor in this kit is the same size as the...

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 24" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. Two pieces of 1/4” threaded...

48 Volt 1800 Watt Razor Dune Buggy Modification Kit for LiFePO4 or Li-ion Battery Throttle to controller wire length 64" Battery pack to controller wire length 24" Motor to controller wire length 24" This is a modification parts kit and requires custom installation of all parts. This is a 48 Volt no batteries (NB) kit that does not include a battery and it does not work with the original Razor Dune Buggy battery pack. We install matching labeled wire connectors on all parts of the kit for easy...

Toggle Switch to Controller wire length 48"Throttle to Controller wire length 48"Charger Port to Controller wire length 24"Motor to Controller wire length 24" Battery to Controller wire length 24" The toggle switch is the On-Off power switch and has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The red push button switch on the throttle is the reverse switch.The chain with master link in this kit is oversized and will need...

Toggle Switch to Controller wire length 48"Throttle to Controller wire length 64"Charger Port to Controller wire length 24"Motor to Controller wire length 24"Battery Pack to Controller wire length 24" The toggle switch is the On-Off power switch and has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The red push button switch on the throttle is the reverse switch. The chain with master link in this kit is oversized and will...

5.5mm x 2.1mm Coaxial Charger Plug to RCA Plug Battery Charger Adapter

5.5mm x 2.1mm Coaxial Charger Plug to XLR Plug Battery Charger Adaptor

Wire Lengths: Foot throttle to controller wire length 59"Controller to junction box wire length 6"Motor to junction box wire length 24"

The motor shaft spins in the clockwise direction and is not reversible. Wire Lengths: Foot throttle to controller wire length 59"Controller to junction box wire length 6"Motor to junction box wire length 24"

Wire Routing Select Clockwise or Counterclockwise motor shaft direction in the options above. You can change the motor shaft direction after receiving the kit if necessary. The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to...

Wire Routing This kit is electronically 100% plug-and-play. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. Select Clockwise or Counterclockwise motor shaft direction in the options above. You can change the motor shaft direction after receiving the kit if necessary. This kit is also available without batteries. One toggle switch is wired as the on/off power switch and the other toggle switch is wired as the...

Wire Routing This kit is electronically 100% plug-and-play. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. Select Clockwise or Counterclockwise motor shaft direction in the options above. You can change the motor shaft direction after receiving the kit if necessary. This is a no batteries (NB) kit. This kit is also available with batteries. One toggle switch is wired as the on/off power switch and the other toggle...