ESP

24 Volt 350 Watt Electric Go Kart Power Kit

24 Volt 500 Watt Electric Go-Kart or Bar Stool Racer Power Kit with Reverse The motor in this kit has an 11 tooth sprocket for #25 chain. We have wheel and axle sprockets for #25 chain which are compatible with the motor sprocket in this kit and axle hubs for several different size axles. Please note that since this kit has reverse a freewheel cannot be used in the drivetrain otherwise the reverse function will not work. Click below to view our full selection of sprockets, axle hubs, and...

24 Volt 350 Watt Electric Go Kart Power Kit The power switch is the rocker switch and the reverse switch is the toggle switch. Motor to controller wire length: 22 InchesBattery pack to controller wire length: 1 FootCharger port to controller wire length: 2 FeetPower switch to controller wire length: 6 FeetReverse switch to controller wire length: 6 FeetFoot throttle to controller wire length: 59 Inches ...

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric tricycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. Sprockets Axle Sprocket Hubs Chains ...

This is a modification kit which requires custom installation of all parts.The 60 tooth sprocket that is included with this kit is machined on an individual order basis so please allow around 7-10 business days for production and outbound shipping.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The batteries in this kit are heavy so this kit weighs around 60 pounds. The motor in this kit has a 9 tooth sprocket for 1/2" x 1/8" (#410) bicycle chain. Need an axle sprocket, axle sprocket hub, or chain to complete your project? Click below to view our full selection of...

With this kit you get $530.40 of parts and labor for $477.00.The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.The batteries in this kit are heavy so this kit weighs around 60 pounds.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets or chain for your...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.