All Parts

Search for The Part You Need

We have this same kit available without batteries which is our item # KIT-MX481800-10-NB. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt heads to fit inside. 1/4" Hole Template Directions (PDF) This modification kit requires custom installation (mounting) of the...

This is a kit with no batteries (NB). We have this same kit with batteries which is our item # KIT-MX481800-10. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt heads to fit inside. 1/4" Hole Template Directions (PDF) This modification kit requires custom...

This is an NB (no batteries) series kit. If you already purchased a 48 Volt battery pack to overvolt a Razor MX500, MX650 or SX500 dirt bike and now want even more power and speed then this is the right kit for you. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt...

The key switch on the throttle is wired as the bike's main on-off power switch. The bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at a reduced power level for slower speeds and a longer range and ride-time. This modification kit requires custom installation (mounting) of the batteries (batteries not included) and the controller. The motor in this kit is the same size as the...

The key switch on the throttle is wired as the bike's main on-off power switch. The bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at a reduced power level for slower speeds and a longer range and ride-time. This modification kit requires custom installation (mounting) of the batteries (batteries not included) and the controller. The motor in this kit is the same size as the...

The key switch on the throttle is wired as the bike's main on-off power switch. The bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at a reduced power level for slower speeds and a longer range and ride-time. This modification kit requires custom installation (mounting) of the battery (battery not included) and the controller. The motor in this kit is the same size as the...

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 24" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. Two pieces of 1/4” threaded...

48 Volt 1800 Watt Razor Dune Buggy Modification Kit for LiFePO4 or Li-ion Battery Throttle to controller wire length 64" Battery pack to controller wire length 24" Motor to controller wire length 24" This is a modification parts kit and requires custom installation of all parts. This is a 48 Volt no batteries (NB) kit that does not include a battery and it does not work with the original Razor Dune Buggy battery pack. We install matching labeled wire connectors on all parts of the kit for easy...

Toggle Switch to Controller wire length 48"Throttle to Controller wire length 48"Charger Port to Controller wire length 24"Motor to Controller wire length 24" Battery to Controller wire length 24" The toggle switch is the On-Off power switch and has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The red push button switch on the throttle is the reverse switch.The chain with master link in this kit is oversized and will need...

Toggle Switch to Controller wire length 48"Throttle to Controller wire length 64"Charger Port to Controller wire length 24"Motor to Controller wire length 24"Battery Pack to Controller wire length 24" The toggle switch is the On-Off power switch and has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The red push button switch on the throttle is the reverse switch. The chain with master link in this kit is oversized and will...

48 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, mopeds, and bikes with 48 Volt lighting systems. 48 Volts DC.Rated for loads between 0.02 Watts through 42 Watts.Maximum momentary load 150 Watts.Works with both Incandescent and LED bulbs.Built-in beeper sounds when lights are flashing. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1" x 1-1/8" x 1-1/8" excluding tab terminals. ...

48 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, mopeds, and bikes with 48 Volt lighting systems. 48 Volts DC.Rated for loads between 0.02 Watts through 42 Watts.Maximum momentary load 150 Watts.Works with both Incandescent and LED bulbs.Built-in beeper sounds when lights are flashing. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1" x 1" x 1-1/8" excluding tab terminals. ...

48 Volt 2.5 Amp Automatic Battery Charger for Panterra and GIO Electric Scooters and BikesPanterra and GIO scooters have charger plugs with non-standard terminal polarity as shown below. 

48 Volt 2.5 Amp Automatic Battery Charger with 2-Port Inline Plug For 48 Volt lead-acid battery packs.

48 Volt 2.5 Amp Automatic Battery Charger with 3-Pin XLR Plug For 48 Volt lead-acid battery packs.

48 Volt 2.5 Amp Automatic Battery Charger with 3-Port House Plug 48 Volt 2.5 Amp (48V 2.5A) electric scooter/bike battery charger. Standard 110-125 Volt AC power input. Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger that stops charging and goes into float mode when the charging cycle is complete to prevent overcharging. Fan cooled. Works with electric scooters and bikes that have four 12 Volt batteries wired in...

48 Volt 2.5 Amp Automatic Battery Charger with 3-Port Inline Plug For 48 Volt lead-acid battery packs.

48 Volt 20Ah LiFePO4 Electric Scooter or Bike Battery

48 Volt Motor Reversing Contactor 48 Volts DC 250 Amps Contacts Wiring Directions:https://electricscooterparts.com/wiringdiagrams/Reverse-Relay-Wiring.pdf

48 Volt 3 Amp Automatic Battery Charger For Panterra Scooters For lead-acid battery packs.

48 Volt 3 Amp Automatic Battery Charger with 2-Port Inline Plug For 48 Volt lead-acid battery packs.

48 Volt 3 Amp Automatic Battery Charger with 3-Pin XLR Plug 48 Volt 3 Amp (48V 3A) electric scooter/bike battery charger for lead-acid battery packs. Standard 110-125 Volt AC power input. Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger which stops charging and goes into float mode when the charging cycle is complete to prevent overcharging.

48 Volt 3 Amp Automatic Battery Charger with 3-Port House Plug 48 Volt 3 Amp (48V 3A) electric scooter/bike battery charger for lead-acid battery packs. Standard 110-125 Volt AC power input. Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger which stops charging and goes into float mode when the charging cycle is complete to prevent overcharging. ...

48 Volt 3 Amp Automatic Battery Charger with 3-Port Inline Plug For 48 Volt lead-acid battery packs.

48 Volt 3 Amp Automatic Battery Charger with C5 Mickey Mouse Plug For 48 Volt lead-acid battery packs.

48 Volt 30Ah LiFePO4 Electric Scooter or Bike Battery

48 Volt 5 Amp Automatic Battery Charger with 3-Pin XLR Plug For 48 Volt lead-acid battery packs.

48 Volt 5 Amp Automatic Battery Charger with 3-Port House Plug For 48 Volt lead-acid battery packs.

48 Volt 5 Amp Battery Charger with House Plug 200-240 Volt AC power input.Type E/F power input plug.House output plug.48 Volt 5 Amp output.For recharging 48 Volt lead-acid battery packs.

48 Volt 500 Watt 2500 RPM Electric Scooter Motor 48V 500W 2500RPM electric scooter motor.Powerful four brush permanent magnet design with 100% ball bearing construction.Includes 11 tooth sprocket for #25 chain. 8.5mm x 10mm sprocket mounting area.18" long power leads. Different size sprockets are available for this motor.Shaft rotation reversible by reversing power leads. Dimensions: 4.2" (106mm) wide x 5.275" (134mm) long excluding shaft, 6-1/2" long including shaft. Shaft is 1" long and...

48V 500W Speed Controller with Reverse Reversible speed controller operates in either forward or reverse mode. Designed for 24 Volt motors up to 500 Watts. Maximum current 20 Amps. Under Voltage protection 42 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends the life of the battery pack. Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions...

48 Volt 500-600 Watt Electric Scooter/Moped/Bike Brushless DC Motor Speed Controller (CW or CCW with Optional Reverse) Designed for 48V DC brushless DC motors between 500W and 600W. Rated current and current limit 30A. Under Voltage protection of 41.5 ±0.5 Volts. Programmable to operate motor in clockwise or counterclockwise direction and has a reverse function which is optional to use. Replaces controllers with fewer connectors because most of the connectors are optional to use. Current...