Search Results for "kit"

24 Volt 500 Watt Electric Go Kart Power Kit with Reverse This kit includes a Throttle Top Speed Adjustable Limiter which can be used to lower the motor's power output for top speed regulation or driver training purposesThe go kart needs to be at a complete stop before switching from forward to reverse, or from reverse to forward, otherwise, the controller may become permanently damaged. We do not recommend this kit for use with younger children who may be tempted to switch directions while the...

Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward.  The key switch is the on/off power switch and the red push button switch on the throttle is the forward/reverse switch. The motor in this kit has a factory-installed 11 tooth...

Wire Routing Chart The Controller to Power Relay wires are approximately 6 Inches long.Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward. The key switch is the on/off power switch and the red push button...

Wire Routing The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction.

Wire Routing The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

The red push button switch on the throttle is wired as the on/off power switch.The motor's shaft and sprocket rotate clockwise so the motor needs to be installed in a position where its shaft and sprocket rotate clockwise when the cart is moving forward. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need...

Powered, geared, and test proven for speeds up to 26 MPH. This is an NB (no batteries) series kit. If you already purchased a 48 Volt battery pack to overvolt a Razor MX500, MX650 or SX500 dirt bike and now want even more power and speed then this is the right kit for you. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled...

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" The Dune Buggy's original battery charger will work with this kit. The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed....

Wire Routing The motor in this kit has an 10 tooth sprocket for #420 chain. We have wheel and axle sprockets plus axle hubs and adapters for #420 chain that are compatible with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

3 MPH Top Speed Increase Rear Sprocket and Chain for KIT-MX24450 Series Kits For use with KIT-MX24450 Series Kits. Includes 65 tooth wheel sprocket and 118 link chain. Increases the top speed by 3 MPH (around 20%) compared to using the original 80 tooth wheel sprocket. ...

Powered, geared, and test proven for speeds up to 26 MPH. The key switch on the throttle turns the bike's power on and off and the bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at reduced power for slower speeds and a longer ride-time. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off...

Wire Routing ChartThe controller to junction box wires are approximately 5 inches long. This kit has been upgraded from its original 1600 Watt motor to the new 1800 Watt motor. Select wire length options above. The speed controller can be programmed so motor runs clockwise or counterclockwise. A reverse switch can be wired to the controller if needed. This kit has a motor without mounting base. This same kit is available with a motor with mounting base. ...