Search Results for "kit"

Select Chain and Wire Length options in the Choose Your Options box above. The motor in this kit has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with the kit. If you need #35 chain then it can be selected in the Choose Your Options box above. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Wire Routing Shipping weight is 65 pounds. The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Features: This kit's speed controller operates motor in clockwise direction only and the direction is not reversable. Wire Lengths: Throttle to controller wire length 60"Controller to junction box wire length 6"Motor to junction box wire length 24"

Wire Lengths: (wire lengths can be changed on request) Charger port controller wire length 18 inches.Battery pack to controller wire length 18 inches.Motor to controller wire length 18 inches.Throttle to controller wire length 64 inches.Switch to controller wire length 65 inches.Brake lever to controller wire length 70 inches. Kit Features: Switch on thumb throttle activates forward/reverse.Separate handlebar mount switch activates power on/off.Brake lever turns off motor when it is pulled....

Plug and play power upgrade kit for version 33-36 MX350 and MX400 dirt bikes. Thia kit has a variable speed twist throttle. Includes heavy-duty large double sided foam mounting tape square for the controller. 24 Volt 450 Watt motor has the same bolt hole pattern as the bike's original motor. Provides around the same top speed as the original motor with improved acceleration and hill climbing ability. A faster top speed could be achieved with this kit if a smaller wheel sprocket was installed...

Wire Routing Chart We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. If the handlebar switch option is selected then the handlebar switch will replace the toggle switch in the kit. The motor has a 10-tooth sprocket for #420 chain. #420 chain with master link options are available in the Choose Your Options area. The shipping weight of this kit is 90 pounds. Need more sprockets or chain? Click below to view our full...

Wire Routing Chart This kit was originally made for converting a gas engine powered DR Powerwagon self-propelled wheelbarrow to electric power, however, it can be used for powering beach wagons and carts or anything that needs to run at a slow speed and have a lot of power. #420 chain with master link options are available in the Choose Your Options area. We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. The throttle in...

This is a No Batteries (NB) kit which includes a battery pack wiring harness with push on terminals for batteries with 1/4" (6.2mm) wide tab terminals (F2 terminals). We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. With a one person vehicle a 250 Watt motor is suitable for a top speed gearing of 15 MPH on flat ground only and if the vehicle will need to travel up grades up to 5% or through grass or dirt then the top...

This is a No Batteries (NB) kit. This kit is also available With Batteries. This is not a bolt-and-go kit. This is a modification kit that requires custom installation of the motor and speed controller. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All...

Kit Warning: Our item # MOT-481000 and MOT-481000B 48 Volt 1000 Watt motors are too long to fit in the MX500, MX650, and SX500 frame and would require metal fabrication and welding to install. Our item # MOT-48750 48 Volt 750 Watt motor does fit in the MX500, MX650, and SX500 frame and is suitable to use with this kit. This kit is sometimes used to overvolt the MX500, MX650, and SX500 dirt bike's original 36 Volt motor, however, depending on riding conditions overvolting the original motor may...

Select Wire Lengths In the Options Box Above Both of the motors spin clockwise when the controller is in the forward direction mode. The motors in this kit have forward brush timing so they spin at different speeds in the clockwise and counterclockwise directions. Due to this both motors should be installed so they spin clockwise when the vehicle is moving forward. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the SWT-95 toggle switch is wired as the...

Two 12 Volt 15Ah batteries. The key switch is wired as the on-off power switch. The motor's speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle.The motor has a factory installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain.The motor's shaft runs in the clockwise direction.  Need sprockets, axle adapters, freewheels, or chain? Click below to view our full selection of sprockets, axle adapters, freewheels, and...