Products 25-36 of 113
Show
Click here to see item numbers
Out of Stock
Availability: Out of Stock
Item #: KIT-481000G-12 -
Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward. The key switch is the on/off power switch and the red push button switch on the throttle is the forward/reverse switch. The motor in this kit has a factory-installed 11 tooth...
Out of Stock
Availability: In Stock
Item #: KIT-48300 -
Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 18" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. Two pieces of 1/4” threaded...
Out of Stock
Availability: In Stock
Item #: KIT-48300-12AH -
Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Controller to reverse relay wire length 12" Motor to reverse relay wire length 18" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the...
Out of Stock
Availability: In Stock
Item #: KIT-AURANTHETIC-1 -
48 Volt 1000 Watt Auranthetic Mini Bike Repower Kit This is a modification kit which requires custom installation of the parts. Custom installation may require cutting, drilling, and fabricating. Wire Lengths Key switch to controller wires: 36"Toggle switch to DC-DC converter wires: 36"Charger port to controller wires: 36"These wire lengths can be changed on request. Kit Notes The key switch turn the power on and off to the controller and the toggle switch turns the power on and off to the 12...
Out of Stock
Availability: In Stock
Item #: KIT-159 -
Wire Routing The motor has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with this kit that fits directly onto the motor and can replace the sprocket for 8mm chain. Power off, power on forward, and power on reverse are activated by the three position key switch.The reverse relays will be wired close to the controller so they can be mounted in the same area. We have motor sprockets for #420 chain which fit the motor in this kit....