Search Results for "kit"

24 Volt 500 Watt Electric Go Kart Power Kit with Reverse This kit includes a Throttle Top Speed Adjustable Limiter which can be used to lower the motor's power output for top speed regulation or driver training purposesThe go kart needs to be at a complete stop before switching from forward to reverse, or from reverse to forward, otherwise, the controller may become permanently damaged. We do not recommend this kit for use with younger children who may be tempted to switch directions while the...

Select Chain and Wire Length options in the Choose Your Options box above. The motor in this kit has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with the kit. If you need #35 chain then it can be selected in the Choose Your Options box above. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward.  The red push button switch on the throttle is the on/off power switch and the toggle switch is the forward/reverse switch. This kit has four large batteries so the shipping...

Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward.  The key switch is the on/off power switch and the red push button switch on the throttle is the forward/reverse switch. The motor in this kit has a factory-installed 11 tooth...

Toggle switches to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24"Motor to controller wire length 18" Charger port wire length 18" This is a modification parts kit and requires custom installation of all parts. The vehicle must be at a complete stop before switching from forward to reverse, or from reverse to forward. Otherwise the controller may become damaged. The chain with master link in this kit is oversized and will need to be...

Wire Routing Chart The Controller to Power Relay wires are approximately 6 Inches long.Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward. The key switch is the on/off power switch and the red push button...

Wire Routing The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction.

Wire Routing The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Powered, geared, and test proven for speeds up to 26 MPH. We have this same kit available without batteries which is our item # KIT-MX481800-10-NB. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt heads to fit inside. 1/4" Hole Template Directions (PDF) This...

Powered, geared, and test proven for speeds up to 26 MPH. This is an NB (no batteries) series kit. If you already purchased a 48 Volt battery pack to overvolt a Razor MX500, MX650 or SX500 dirt bike and now want even more power and speed then this is the right kit for you. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled...

Powered, geared, and test proven for speeds up to 26 MPH. The key switch on the throttle turns the bike's power on and off and the bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at reduced power for slower speeds and a longer ride-time. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off...

Powered, geared, and test proven for speeds up to 26 MPH. The switch on the throttle activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at reduced power for slower speeds and a longer ride-time. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's swingarm so the motor's power cord does not hit it, and one 1/4"...