Search Results for "kit"

Wire Routing Chart The Controller to Power Relay wires are approximately 6 Inches long.Choose the chain and wire lengths which are needed in the 'Choose Your Options' box above. Details about this kit: This kit does not include a 48 Volt battery pack or battery charger. However, we can make a new version of this kit with a battery pack and battery charger on request.This Rhoades car kit has reverse while most of our other Rhoades car kit do not have reverse. The downside of having reverse is...

Powered, geared, and test proven for speeds up to 26 MPH. The switch on the throttle activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at reduced power for slower speeds and a longer ride-time. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4"...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.

Same as KIT-2301 except with a plastic throttle instead of a metal throttle, and with an optional chain instead of with an included chain.

Wire Routing Select the wire lengths of the kit above. The motors in this kit rotate in the clockwise direction and they have forward brush timing so they both need to rotate in the same direction to have equal speeds and power outputs. We have wheel and axle sprockets, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need more sprockets or chain? Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Select Chain and Wire Length options in the Choose Your Options box above. The motor in this kit has an 11 tooth sprocket for 8mm chain factory installed onto it and a 10 tooth sprocket for #35 chain is included with the kit. If you need #35 chain then it can be selected in the Choose Your Options box above. We have wheel and axle sprockets for 8mm and #35 chain which can be used with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. (We Also Have A 3/4" Axle Version) Freewheel to axle...

Powered,  geared, and test proven for speeds up to 26 MPH. This is a kit with no batteries (NB). We have this same kit with batteries which is our item # KIT-MX481800-10. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt heads to fit inside. 1/4" Hole Template...

Powered, geared, and test proven for speeds up to 26 MPH. This kit has been upgraded from its original 1600 Watt motor to the new 1800 Watt motor. This NB (no batteries) series kit is the exact same kit as our KIT-MX481800-3 kit only without the batteries or battery charger. There is the option to add a 48 Volt 1.6 Amp charger for lead-acid batteries to this kit if needed though. If you already purchased a 48 Volt battery pack to overvolt a Razor MX500, MX650 or SX500 dirt bike and now want...

Powered, geared, and test proven for speeds up to 26 MPH. This NB (no batteries) series kit is the exact same kit as our KIT-MX481800-2 kit only without the batteries or battery charger. There is the option to add a 48 Volt 1.6 Amp charger for lead-acid batteries to this kit if needed though. If you already purchased a 48 Volt battery pack to overvolt a Razor MX500, MX650 or SX500 dirt bike and now want even more power and speed then this is the right kit for you. The key switch on the...

Powered, geared, and test proven for speeds up to 26 MPH. We have this same kit available without batteries which is our item # KIT-MX481800-10-NB. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4" hole drilled into the inside of the frame for one of the motor's bolt heads to fit inside. 1/4" Hole Template Directions (PDF) This...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. Need sprockets or chain? Click below to view our full selection of sprockets and chains. Sprockets Chains ...