Search Results for "1000 watt kit"

This is an NB (no batteries) series kit which requires a 36 Volt battery pack to use. This kit is also Available With Batteries. This kit requires modifications to install. The battery pack, controller, motor, and reverse switch need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. With this kit the power switch is no longer wired in between the battery pack and controller, and there is an adapter...

Details about this kit: This is a modification kit which may require creating a place of the Rhoades car to mount the kit's parts to. The motor rotates clockwise so it needs to be mounted in a position that allows the car to move forward when the motor rotates clockwise.  We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. Battery pack, battery pack wiring harness, and battery charger not included with this kit. This...

Brushless Motor Replacement Kit with 1000 Watt Motor for Currie, GT, Mongoose, and Schwinn Electric Scooters This is a 36 Volt kit and requires changing the original 24 Volt battery pack to a 36 Volt battery pack. Changing the battery pack to 36 Volts will require smaller batteries, modifying the battery tray, or mounting one of the batteries outside of the battery tray.Replaces brushless motors with 15 tooth freewheel sprockets on older versions of Currie, GT, Mongoose, and Schwinn electric...

Toggle switch to controller wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Motor to controller wire length 18" The toggle switch has 48" of wire so it can be mounted on the front of the Dune Buggy if wanted. This wire length can be shortened on request. The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed. Two pieces of 1/4” threaded...

Toggle switches to controller/relay wire length 48" Throttle to controller wire length 48" Battery pack to controller wire length 24" Charger port wire length 24" Controller to reverse relay wire length 12" Motor to reverse relay wire length 18" The toggle switches have 48" of wire so they can be mounted on the front of the Dune Buggy if wanted. These wire lengths can be shortened on request. The vehicle must be at a complete stop before switching from forward to reverse, or from reverse to...

Razor MX500 and MX650 48 Volt 1000 Watt Controller, Throttle, and Charger Kit Please note that our 48 Volt 1000 Watt motor is too long to fit in the MX500, MX650, and SX500 frame and would require metal fabrication and welding to install. This kit is sometimes used to overvolt the original motor, however, depending on riding conditions overvolting the original motor may cause it to run hotter than normal which may decrease its lifespan. Printable Installation Directions ...

Battery Jumper Wires = 5" LongBattery to Speed Controller Connector Wires = 24" long The motor in this kit has an 11 tooth sprocket for 8mm chain. We have wheel and axle sprockets for 8mm chain which are compatible with this kit. We also have sprockets for #25, #35, and #420 chain which fit the motor in this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

Wire Routing Chart Select the wire lengths of the kit above. The sprocket installed on this kit's motor is for 8mm chain, however, we also have sprockets for #25, #35, and #420 chain that fit this motor. The links below lead to the different sprockets and chains that can be used with this kit. SprocketsChain ...

Wire Routing Chart The red button on the throttle is the On/Off power switch.The throttle has battery indicator lights which let you know how much capacity is left in the battery pack and also when the power is on or off. Select the wire lengths of the kit above.

Toggle Switches to Controller wire length 48"Throttle to Controller wire length 48"Battery Pack to Controller wire length 24"Charger Port to Controller wire length 24"Controller to Reverse Relay wire length 12"Motor to Reverse Relay wire length 18" The toggle switches have 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request. The master link in this kit is oversized and will need to be shortened to the correct length after the...

Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward.  The red push button switch on the throttle is the on/off power switch and the toggle switch is the forward/reverse switch. This kit has four large batteries so the shipping...

Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward.  The key switch is the on/off power switch and the red push button switch on the throttle is the forward/reverse switch. The motor in this kit has a factory-installed 11 tooth...