SH

24 Volt Speed Controller with 6 Wire Throttle Connector for eZip, IZIP, Currie, Schwinn, Mongoose, and GT Electric Scooters and Bikes Designed for 24 Volt 500 Watt and 600 Watt motors.Outputs 720 Watts so it can be used with 750 Watt motors however the motor's power will be limited to 720 Watts.Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents...

24 Volt Speed Controller with 5 Wire Throttle Connector for eZip, IZIP, Currie, Schwinn, Mongoose, and GT Electric Scooters and Bikes Designed for 24 Volt 750 Watt and 900 Watt motors. Maximum current 40 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. For eZip, IZIP, Currie, Schwinn, Mongoose, and GT electric scooters...

Variable Speed Controller for Razor Scooters and Bikes Works with 24 Volt motors up to 500 Watts. Converts single speed Razor scooters and bikes to have variable speed control.When used in conjunction with THR-56R throttle fits the following Razor models: E200 and E200S Scooter Version 13+ E225 Scooter Version 13+ E300 and E300S Scooter Version 11 and 13+ E325 Scooter Version 11 and 13+ MX350 Dirt Bike Version 33-36 MX400 Dirt Bike Version 33-36 ...

This sprocket is in the pre-production phase. Click on the "Email me when back-in-stock" link above to receive an email when they are produced and in stock.10 Tooth 10mm Dual D-Bore Sprocket for #25 Chain 7/8" OD, 8.5mm x 10mm ID.Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.Made from hardened steel with a black oxide finish.

11 Tooth 10mm Double D-Bore Sprocket for #25 Chain For #25 and #25H (heavy-duty) chain. 11 teeth.1" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place. Made from hardened steel with a black oxide finish. Compatibility: MY1020 motors.Many electric scooters and go-karts.Razor Ground Force small jackshaft sprocket.  ...

SPR-2511D, 11 Tooth, 8mm D-Bore Sprocket For #25 Chain

11 Tooth, 10mm D-Bore Sprocket For #25 Chain

11 Tooth 10mm Bore Sprocket With Pin For #25 Chain (SPR-2511P)

SPR-2512D2, 12 Tooth 8mm Dual D-Bore Sprocket For #25 Chain

SPR-2512E1, 12 Tooth 10mm Dual D-Bore Sprocket For #25 Chain