SH

80 Tooth Drive Belt Cog For 5mm Pitch Belts (SPR-COG80)

80 Tooth Rear Sprocket For #25 Chain 6-1/2" OD2-1/8" ID4 bolt mounting pattern.1/4" (6.2mm) bolt hole ID.F4 mounting pattern.Bolts directly onto our 4-hole and 16-tooth freewheel clutches.

81" Brake Cable with 75" Housing 81" brake cable with 75" brake cable housing.Barrel-style brake lever connector head. Nickel-plated brass ferrule end caps.

84 Tooth Sprocket with F4 Mounting Pattern for T8F (8mm) Chain 216mm (8-1/2") OD.54mm (2-1/8") ID.4mm thick. 4 bolt mounting pattern. 6.2mm ID bolt holes. Adjacent mounting bolt holes are spaced 47mm (1.85") apart from center to center. Bolts directly onto our 4-hole and 16-tooth freewheel clutches. F4 mounting pattern.

89 Tooth Rear Sprocket for #25 Chain 7-1/4" OD2-1/8" ID4 bolt mounting pattern. 1/4" (6.2mm) bolt hole ID. Bolts directly onto our 4-hole freewheel clutches. F4 mounting pattern.

5/16" and 8mm Ring Terminal Connector for 16-14 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts 5/16" or 8mm stud, machine screw, or bolt. 8.4mm ID. For 12-10 gauge wire.

9 Pin Throttle/Speed Controller Connector Set With Pins (CNX-55)

9 Tooth 10mm D-Bore Sprocket for 1/2" x 1/8" Bicycle Chain 1-5/8" OD.8.5mm x 10mm D-bore ID. Fits 10mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place. For 1/2" x 1/8" (#410) bicycle chain.

9" Long Electric Scooter and Bike Battery Pack Jumper Cable Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal connectors. Designed for interconnecting multiple batteries into a single battery pack. Premium locking tab terminals lock themselves onto the battery tabs until a button is pressed to release them. Made with 12 gauge stranded copper wire.

90/65-6.5 Tubeless Tire for Electric Scooters and Bikes Tubeless tire (can also be used with a tube). Maximum tire pressure 40 PSI. Compatible inner tube size: 2.75x3.00-6.5We Carry a Tube for This Tire

90/65-8 (2.75x3.00-8) Electric Pocket Bike Tire