Products 997-1008 of 1163
Show
Availability: In Stock
Item #: CVT-12151 -
48-100 Volt DC to 12 Volt DC 15A Voltage Converter Electric scooter, moped, and e-bike DC to DC converter. Converts 48V, 60V, 72V, or 84V DC to 12 Volts DC. 12 Volt output current 15 Amps (replaces both 10A and 15A converters). Runs 12 Volt DC lights, horns, and accessories off of higher DC Voltages. Dimensions Case not including mounting tabs 3.40" (61mm) long x 2.32" (59mm) wide. Center to center distance between mounting holes 3.35" (85mm). Wiring Directions ...
Availability: In Stock
Item #: SWT-33402 -
2 Wire 2 Position Key Switch with 2 Keys Replaces similar key switches with red and green wires.Electric scooter and bike key switch with 2 wires and 2 keys. Two position off-on key switch. Key removable in off position only. This key switch has a tab with a hole in it for screw mounting to instrument cluster or scooter body. Wire Length: 5-1/2 InchesWire Colors: Purple and BlackWire Terminals: 2.8mm Female ...
Availability: In Stock
Item #: SWT-712 -
Motor Reversing Switch Motor reversing switch for electric ride-ons, ATVs, go karts and other small electric vehicles. This is the OEM forward/reverse switch found on many children's ride-on electric vehicles. Two self-locking mounting tabs with tolerance compensation ribs secure it to the panel opening plus a front bezel that is bolted to the panel to create an extra strong and secure attachment. Three position switch has Drive, Park, and Reverse positions and stays in the position that it is...
Availability: Out of Stock
Item #: SWT-722 -
Heavy Duty Motor Reversing Switch Heavy-duty motor reversing switch for electric cars, golf carts, ATVs, quads, go-karts, rickshaws, small work trucks, and other small to medium size electric vehicles.The dimensions of this switch including the handle and terminals are 4.75" high x 2.8" wide x 4" deep.Three position switch has reverse (left), neutral (center), and forward (right) positions.The selector handle is removable for panel mount installation.Wire terminal mounting screws are 5mm and...
Availability: In Stock
Item #: BRK-506-2M -
120mm Disk Brake Rotor 2mm Thick120mm OD33.7mm ID5.5mm ID Mounting Holes22mm Adjacent Mounting Hole Distance (Center To Center) 44mm Mounting Hole Bolt Circle Diameter (BCD) 44mm ISO Disc Brake Rotor Mounting Pattern
Availability: In Stock
Item #: SWT-33403 -
2 Wire 2 Position Key Switch with 2 Keys Replaces similar key switches with red and green wires.Electric scooter and bike key switch with 2 wires and 2 keys. Two position off-on key switch. Key removable in off position only. This key switch has a tab with a hole in it for screw mounting to instrument cluster or scooter body. Wire Length: 5-1/2 InchesWire Colors: Yellow and RedWire Terminals: 2.8mm Female ...