Y

12 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, bikes, and pocket bikes with 12 Volt lighting systems. Works with Incandescent and LED bulbs. Built-in beeper sounds when turn signals are blinking. 1/4" (6.3mm) wide tab terminals for push-on terminals or connector. Dimensions of flasher are 1-3/4" x 1-3/8" x 1" excluding terminals and mounting tab. ...

8-1/2x2 Inner Tube with 134mm ID and 90° Bend 90° Angle Valve Stem 8½x2 electric scooter inner tube with 134mm (5.28") ID and bent valve stem.Valve stem has 90 degree bend and 90 degree angle.

Front Mount Heavy Duty Steel Foot Throttle 6-3/8" long foot pedal arm. 2-1/2" x 1-9/16" mounting plate mounts onto any flat surface with four mounting holes. IP64 rated dust and water splash resistant construction. 45" long throttle cable. Wire colors: red, black, and white. The foot pedal rod can be adjusted and positioned in any 360 degrees position. The acceleration is uniform and easy to control. Front mount foot throttle bolts to the firewall. Long life industrial grade foot throttle with...

Key Switch for eWheels EW-37 Electric Scooter This is an aftermarket part with the same fit and function as the original part. Includes a separate bezel to match the style of the original bezel. The bezel is removed when installing this part and then replaced after installation is complete. Sometimes referred to as an ignition switch or key and ignition.

2 Wire 3 Position Key Switch with Handlebar Lock Pin Electric scooter, moped, and bike key switch with 2 wires and 2 keys. Includes seat and trunk lock with mounting hardware. Three position locked-off-on key switch. Key removable in locked and off position. 59mm center-to-center distance between mounting holes. 10mm diameter round lock pin. Lock pin protrudes 10mm in unlocked position and 20mm in locked position. Wire Length: 5 Inches Wire Terminals: 2.8mm Male ...

FUS-AGC10, 12 Amp AGC Glass Fuse

5000 Lumen LED Ultra-Bright Rechargeable Electric Scooter or Bicycle Headlight Included headlight, battery, battery charger, handlebar mounting rubber straps, and headgear for converting from a scooter or bicycle headlight to a light that you wear on your head. 7 super bright LED lamps with reflectors. Anodized aluminum headlight body with glass lens and plastic mounting base.Lighted push button switch on back of light. Installation Directions ...

8 Amp GMA Glass Fuse 3/16 inch x 3/4 inch

36-84 Volt DC to 12 Volt DC 10A Voltage Converter Electric scooter, moped, and e-bike DC to DC converter. Converts 36V, 48V, 60V, 72V, or 84V DC to 12 Volts DC. 12 Volt output current 10 Amps. Runs 12 Volt DC lights, horns, and accessories off of higher DC Voltages.5 Volt output for USB plugs (optional to use). Dimensions Case not including mounting tabs 3.40" (61mm) long x 2.32" (59mm) wide. Center to center distance between mounting holes 3.35" (85mm). Wiring Directions Red Wire = 36-84 Volt...

12-80V LED Headlight Bulb with 180 Degree Opposed Lamps Super Bright LED headlight bulb operates between 8 through 80 Volts. Twin 180-degree opposed 12 Watt super bright LED lamps. Light output is equivalent to a 50 Watt incandescent bulb.

3.50-10 Street Scooter Inner Tube with Bent Valve Stem Inner tube for electric street scooters, bikes, and mopeds. Compatible with 3.50-10, 90/90-10, 100/80-10, and 100/90-10 tires. Valve stem has 60 degree bend and 90 degree angle.

TUB-20x1.75/2.125, 20x1.75/2.125 Inner Tube With Straight Valve Stem