Y

Front Axle for Electric Scooter or Bike, 10mm x 210mm 10mm (~3/8") OD x 210mm (~8-1/4") LongCompatible with 6000 and 6200 series wheel bearings.Includes nut, washers, and spacers. 

48V 25W/25W Double Contact Double Element Headlight Bulb with Flanged Base

48V 25W/25W Single Contact Single Element Headlight Bulb

48V 25W/25W Double Contact Double Element Headlight Bulb with 20mm Base

Zappy Pro Flex 350 and Pro Flex 500 Brake Assembly The original brake may be silver and this brake is black. Includes fully assembled brake plate with factory installed brake shoes. Brake Shoes for This Brake are also available. Compatibility: Zappy Pro Flex 350 (36 Volt) Zappy Pro Flex 500 (48 Volt)

9 Tooth Sprocket with 17mm x 12mm Double D-Bore for #41 and #420 Chain For #41 and #420 chain. 9 teeth. For motors with 17mm x 12mm double D-bore shafts. Hardened high carbon steel for long service life. Compatible with MY1020Z and newer model MY1122ZXF gear motors.

Pair Black Rubber Waffle Style Handlebar Grips 4-1/2" length.

18 Tooth Freewheeling Sprocket with 1.375" x 24 TPI Right Hand Threads for 1/2"x1/8" (#410) Bicycle Chain Long Yih DNP LY-BB18T8 Freewheel 1.375" x 24 TPI Right Hand (Clockwise) Threads Compatibility: Propella 2.2 Electric Bike (With Bafang Rear Hub Motor that has 1.375" x 24 TPI Threads) Available in M35x1.00 Threads Version: SPR-41018F-M Freewheel   Special order part. After ordering please allow around 2 weeks for this part to arrive at our facility. --> ...

3 Pin House Charger Port or Power Port with 16" Wires and Ring Terminals House shaped battery charger port with three vertical pins (3V).Built-in spring-loaded protective dust cover. 16 inch long 14 gauge red and black wires. 6.4mm (1/4") ID ring terminals.

Set of Four Brush Springs for MY1016 and MY1018 Motors Spring Dimensions: Length: 20mm Diameter: 5mm We also carry brushes for MY1016 and MY1018 motors.

36V 10W Single Contact Single Filament Headlight Bulb

Drum Brake Assembly with Backing Plate and Shoes Backing Plate Outside Diameter: 5.20" (132mm) Brake Shoe Lining Outside Diameter: 4.29" (109mm)Brake Shoe Lining Width: 0.94" (24mm) Axle Mounting Hole Inside Diameter: 0.394" (10mm)