Y

Heavy-Duty 12 Inch Dual 2-Prong Connector with 10 AWG Wire

Two mating 2-prong connectors attached to 11 inches of 12 gauge wire. 12 inch overall length. The wires can be cut in the middle to form a detachable wiring harness or cut at one end to form a single 2-prong connector. This connector is commonly used to connect the battery pack to the speed controller or speed controller to the motor of an electric scooter or electric bike.

Heavy-Duty 12" Single 2-Prong Female Positive Connector with 10 Gauge Wire

Heavy-Duty 12" Single 2-Prong Male Positive Connector with 10 Gauge Wire

Heavy-Duty 2-Prong Panel Mount Port Connector with 12 Gauge Wire

Heavy-Duty 2-Prong Panel Mount Port Connector with 12 Gauge Wire Panel mount 2-prong connector port.6 inches of 12 gauge wire with a 2-terminal connector at end of wires.

Heavy-Duty Brake Cable Housing Ferrule Sold individually.Made from nickel-plated brass.12mm long, 5mm ID, 3mm cable hole.For 5mm OD brake cable housings with brake cables up to 3mm OD.

House Charger Plug to Xiaomi Plug Battery Charger Adapter Converts battery chargers with House plugs to have a Xiaomi plug. Xiaomi plugs are used on Xiaomi scooters plus also on many other brands. Xiaomi Plug

House Plug Reverse Polarity Battery Charger Adapter Reverses battery charger output plug polarity. Discontinued by manufacturer. Replace with CNX-24517.

Hub Motor Spacer Washer for 12mm Axle Spacer washer for hub motors with 12mm axles. 12mm x 10mm double d-bore.3mm thick. Made from high-strength steel with yellow or white zinc plating for corrosion protection.

Hub Motor Spacer Washer for 14mm Axle Spacer washer for hub motors with 14mm axles. 14mm x 10mm double d-bore. 2mm thick. Pro Tip 3mm thick spacer washers are most commonly used on both sides of the motor and 2mm thick spacer washers are most commonly used between the external brake disc and the brake cover to adjust the gap.

Hub Motor Spacer Washer for 14mm Axle Spacer washer for hub motors with 14mm axles. 14mm x 10mm double d-bore.3mm thick. Pro Tip 3mm thick spacer washers are most commonly used on both sides of the motor and 2mm thick spacer washers are most commonly used between the external brake disc and the brake cover to adjust the gap.