Search Results for "power kit"

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The 44 tooth sprocket is custom machined to fit onto the freewheel so please allow up to 5 business days for it to be made. The...

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric bicycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit. The key switch on the THR-105K throttle turns the power on and off.

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available upon request. This...

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 3/4" axles and has a 3/16" keyway. Freewheel to axle adapters for different size axles are available upon request....

Wire Routing ChartThe controller to junction box wires are approximately 5 inches long. This is an NB (No Batteries) kit. It is also Available With Batteries. Select wire length options above. The controller can wired so the motor runs clockwise or counterclockwise. A reverse switch can be wired to the controller if needed. This kit has a motor with mounting base. This same kit is available with a motor without mounting base. ...

Wire Routing The motor's forward direction is clockwise and reverse direction is counterclockwise. The motor should be installed so when the go-kart is traveling forward the motor runs in the clockwise direction. Select the wire lengths of the kit above.Select toggle switch or key switch power switch option above.The Voltmeter lights up when the power or key switch is on and lets you know when the battery pack Voltage is getting low.A 10 tooth motor sprocket for #35 chain is included with this...

Wire Routing The motor's forward direction is clockwise and reverse direction is counterclockwise. The motor should be installed so when the go-kart is traveling forward the motor runs in the clockwise direction. Select the wire lengths of the kit above.Select toggle switch or key switch power switch option above.Select with or without Voltmeter option above. The Voltmeter lights up when the power switch is on and lets you know when the battery pack is getting low.Select a 10-tooth motor...

Shipping weight of this kit is 75 pounds. Wire Lengths: Power switch to controller wire length 9"Throttle to controller wire length 60"Charger port to controller wire length 12"Controller to junction box wire length 6"Battery pack to junction box wire length 12"Motor to junction box wire length 24"

Wire Routing This is a no batteries (NB) kit. The battery wiring harness fits batteries with 1/4" wide push-on spade (F2) connectors. The key switch is wired as the on/off power switch and the toggle switch is wired as the forward/reverse switch. The controller is programmable so the motor rotates clockwise or counterclockwise in the forward direction. ...

Shipping weight of this kit is 75 pounds. Wire Lengths: Power switch to controller wire length 9"Throttle to controller wire length 60"Charger port to controller wire length 12"Controller to junction box wire length 6"Battery pack to junction box wire length 12"Motor to junction box wire length 24"

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric bicycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit.  The push button switch on the THR-132 throttle turns the power on and off.

The controller can be programmed to run the motor in the clockwise or counterclockwise direction. A switch can be wired to the controller to activate its reverse feature. The red push-button switch on the throttle is wired as the on-off power switch. This kit contains the following parts and labor (click below for details):