SH

TIR-12250AT, 12-1/2x2.5 Heavy-Duty All-Terrain Tread Scooter Tire

12-1/2x2.5 Inner Tube With Straight Valve Stem Works with 12-1/2x2.5 (12.5x2.5) and 12-1/2x2.75 (12.5x2.75) tires.

12-1/2x2.75 Knobby Tread Tire for Razor MX350 and MX400, Plus other Makes and Models

12-1/2x3.0 Inner Tube With Bent Valve Stem (TUB-12.5X3.0)

12-1/2x3.0 Knobby Tread Electric Scooter Tire

12-1/2x3.0 V-Style Street Tread Scooter Tire (TIR-1253)

120mm Disk Brake Rotor2mm Thick120mm OD37.2mm ID5.6mm ID Mounting Holes24mm Adjacent Mounting Hole Distance (Center To Center)48mm Mounting Hole Bolt Circle Diameter (BCD)

120mm Disk Brake Rotor 2mm Thick 3 Mounting Holes 120mm OD 35.1mm ID 6.5mm ID Mounting Holes 41mm Adjacent Mounting Hole Distance (Center To Center) 47mm Mounting Hole Bolt Circle Diameter (BCD)

12V 150W Electric Scooter/Bicycle Speed Controller Designed for 12 Volt motors up to 150 Watts. Maximum current 13 Amps. Under Voltage protection 10.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions ...

12V 250W Electric Scooter/Bicycle Speed Controller Designed for 12 Volt motors up to 250 Watts. Maximum current 21 Amps. Under Voltage protection 10.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions ...

12V 250W Heavy-Duty Electric Scooter/Bicycle Speed Controller Designed for 12 Volt motors up to 250 Watts. Maximum current 21 Amps. Under Voltage protection 10.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Wiring Directions ...

13 Tooth 10mm Bore Sprocket with Pin for #25 Chain 1-1/8" OD10mm IDAttaches to the motor shaft with included 3mm x 20mm roll pin.