SH

Rear Rim with Left Hand Threads for 12-1/2x2-1/4, 12-1/2x2-1/2, or 12-1/2x3 TiresM34x1.00 left-hand (Counterclockwise) freewheel threads.Uses two 6001Z or 6001RS wheel bearings.Axle not included.

Rear Shock for eZip, IZIP and Schwinn 1000 Series Plus EVO 500 and 800 Electric Scooters Dimensions: 4-3/4" Long x 1-3/4" WideCenter to Center Distance Between Mounting Bolts: 6"Mounting Bolt Hole Diameter: 8mmUpper and Lower Mount Width: 24mmSpring Tension: 2000 LBS/IN

Rear Sprocket for Currie, eZip, IZIP, GT, Mongoose, and Schwinn Electric Scooters Compatible with Currie, eZip, IZIP, GT, Mongoose, and Schwinn electric scooters. 90 teeth, 7-1/4" OD, 34mm (1-5/16") ID. 1.375" x 24 TPI right-hand clockwise threads. Has ISO standard threads that fit practically all modern bicycle wheels. SPR-2589F is a lower-priced 89-tooth freewheel sprocket that directly replaces this sprocket. ...

Rear Wheel Freewheel Clutch M35x1.00 right-hand (clockwise) threads. Works with 2-1/8" (54mm) ID chain sprockets with four bolt mounting pattern. When not used to mount a sprocket onto then it is a 16 tooth sprocket for 1/2" x 1/8" bicycle chain.

Rear Wheel Freewheel Clutch (Right Side) Electric scooter, dirt bike, and pocket bike freewheel clutch mechanism with for right hand side chains. F4 sprocket mounting pattern. This freewheel has four notches for installation and removal with a freewheel tool. Freewheel engages in the clockwise directions. 3-1/16" OD x 1-11/32" ID. Works with 2-1/8" (54mm) ID chain sprockets with four bolt mounting pattern. Adjacent mounting bolt holes are spaced 47mm (1.85") apart from center to center. Fits...

Rear Wheel Freewheel Clutch Freewheel engages in the clockwise directions. 3-1/16" OD x 1-11/32" ID. Works with 2-1/8" (54mm) ID chain sprockets with four bolt mounting pattern. Adjacent mounting bolt holes are spaced 47mm (1.85") apart from center to center. Fits 34mm OD threaded wheel hubs. 34mm ID. M35x1.00 right-hand threads. More Freewheel Clutches ...

Right Hand Brake Lever with Switch Premium right-hand three-finger pull brake lever. Mirror mounting hole with 6mm right hand (clockwise) threads.Built-in brake switch with 70" long cable. High-profile design reaches over handlebar grips and controls. The brake lever has a return spring. The brake switch is normally open. 2.8mm male terminals for white wire connectors.For 7/8" (22.2mm) diameter handlebars. ...

Aluminum Brake Lever With Brake Switch, Right Hand Brake Lever with Switch (LEV-60R)

Right Hand Brake Lever with Switch Premium all aluminum right hand three finger pull brake lever. Built-in brake switch with 70" long cable. High-profile design reaches over handlebar grips and controls. Brake lever has return spring. Brake switch is normally open. Fits all electric scooter and bike handlebars. 2.8mm male terminals for white wire connectors.Matching Left Hand Brake Lever is available. ...

Right Hand Brake Lever with Switch (LEV-22R)

Right Hand Brake Lever with Switch Premium all aluminum right hand three finger pull brake lever. Built-in brake switch with 70" long cable. High-profile design reaches over handlebar grips and controls. Brake lever has return spring. Brake switch is normally open. Fits practically all electric scooter and bike handlebars. 2-terminal 2.8mm male connector housing with female terminals.