SH

9" Long Electric Scooter and Bike Battery Pack Jumper Cable Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal connectors. Designed for interconnecting multiple batteries into a single battery pack. Premium locking tab terminals lock themselves onto the battery tabs until a button is pressed to release them. Made with 12 gauge stranded copper wire.

3 Pin Battery/Motor Connector Set With Pins (CNX-150)

#10 (5mm) Ring Terminal Connector for 10-8 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts #10 or 5mm stud, machine screw, or bolt. 5.25mm ID. For 10 through 8 gauge wire.

#10 (5mm) Ring Terminal Connector for 12-10 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts #10 or 5mm stud, machine screw, or bolt. 5.25mm ID. For 12 through 10 gauge wire.

Fuse Holder and Relay Connector Terminals for 12-10 Gauge Wire With locking tab that snaps into fuse holder or relay connector socket.Crimp or solder on wire terminals for 12 through 10 AWG wire.

#10 and 5mm Ring Terminal Connector for 22-16 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts #10 or 5mm stud, machine screw, or bolt. 5.2mm ID. For 22-16 gauge wire.

#10 and 5mm Ring Terminal Connector for 16-14 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts #10 or 5mm stud, machine screw, or bolt. 5.2mm ID. For 16-14 gauge wire.

4 Pin Battery/Motor Connector Set With Pins (CNX-160)

5/16" and 8mm Ring Terminal Connector for 16-14 Gauge Wire Crimp-on or solder-on ring terminal connector. Ring accepts 5/16" or 8mm stud, machine screw, or bolt. 8.4mm ID. For 12-10 gauge wire.

2.8mm Male Terminal for Standard White Wire Connectors 2.8mm male wire connector terminal for 2.8mm white wire connectors. For 22 through 18 gauge wire.

Two mating 2-prong connectors attached to 11 inches of 12 gauge wire. 12 inch overall length. The wires can be cut in the middle to form a detachable wiring harness or cut at one end to form a single 2-prong connector. This connector is commonly used to connect the battery pack to the speed controller or speed controller to the motor of an electric scooter or electric bike.