ESP

Razor MX500 and MX650 48 Volt 1000 Watt Controller, Throttle, and Charger Kit Please note that our 48 Volt 1000 Watt motor is too long to fit in the MX500, MX650, and SX500 frame and would require metal fabrication and welding to install. This kit is sometimes used to overvolt the original motor, however, depending on riding conditions overvolting the original motor may cause it to run hotter than normal which may decrease its lifespan. Printable Installation Directions--> ...

Kit Warning: Our item # MOT-481000 and MOT-481000B 48 Volt 1000 Watt motors are too long to fit in the MX500, MX650, and SX500 frame and would require metal fabrication and welding to install. Our item # MOT-48750 48 Volt 750 Watt motor does fit in the MX500, MX650, and SX500 frame and is suitable to use with this kit. This kit is sometimes used to overvolt the MX500, MX650, and SX500 dirt bike's original 36 Volt motor, however, depending on riding conditions overvolting the original motor may...

This is not a bolt-and-go kit. This is a modification kit that requires custom installation of motor, speed controller, and battery pack. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All connectors and adapters are labeled for easy plug-and-play wiring...

This is not a bolt-and-go kit. This is a modification kit that requires custom installation of motor, speed controller, and battery pack. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All connectors and adapters are labeled for easy plug-and-play wiring...

This is a No Batteries (NB) kit. This kit is also available With Batteries. This is not a bolt-and-go kit. This is a modification kit that requires custom installation of the motor and speed controller. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All...

Set of Two Wheel Bearings for Hyper HPR 350 Electric Motorcycle Upgrade your HPR 350 from the original unsealed bearings to these sealed wheel bearings which keep dirt, dust, and moisture out for a longer bearing life.

Side Mount Turn Signal with 24 Volt 5 Watt Bulb

Side Mount Turn Signal with 24V Bulb Turn signal with 24 Volt 3 Watt bulb for 24 Volt electric scooters and bikes. 2-1/2" wide x 3" long with 1-3/4" round amber plastic lens. 10" long power cable leads. Chrome plated plastic body with 3/8" OD nickel plated steel mounting post and nut. More turn signal lights are available on our Turn Signals Page. ...

Side Mount Turn Signal with 24V Bulb Turn signal with 24 Volt 3 Watt bulb for 24 Volt electric scooters and bikes. 2-1/2" wide x 3" long with 1-3/4" round amber plastic lens. 10" long power cable leads. Black plastic body with 3/8" OD nickel plated steel mounting post and nut. More turn signal lights are available on our Turn Signals Page. ...

Side Mount Turn Signal with 40V (36V) Bulb Turn signal with 40 Volt (36V) 3 Watt bulb for 36 Volt electric scooters and bikes. 2-1/2" wide x 3" long with 1-3/4" round amber plastic lens. 10" long power cable leads. Black plastic body with 3/8" OD nickel plated steel mounting post and nut. More turn signal lights are available on our Turn Signals Page. ...

Side Mount Turn Signal with 40V (36V) Bulb

Side Mount Turn Signal with 40V (36V) Bulb Turn signal with 40 Volt (36V) 3 Watt bulb for 36 Volt electric scooters and bikes. 2-1/2" wide x 3" long with 1-3/4" round amber plastic lens. 10" long power cable leads. Chrome plated plastic body with 3/8" OD nickel plated steel mounting post and nut. More turn signal lights are available on our Turn Signals Page. ...