Products 337-348 of 368
Show
Availability: In Stock
Item #: KIT-154 -
This kit is made for American Engines PedalPower Cycle Chair Tricycles that have their original motor. This kit does not include a motor. This is a modification kit that requires custom installation of all parts. The installer needs to have good electrical wiring skills and an understanding of how to custom install electrical parts to be able to safely install this kit.If the Cycle Chair has a hoop style handlebar then it will need to be replaced with a high rise bicycle...
Availability: In Stock
Item #: KIT-157-B -
The two gear motors in this kit have clockwise shaft rotation and should be used with clockwise shaft rotation for best performance. When these gear motors are run counterclockwise their shaft speed will be slower then when run clockwise, so we recommend installing both motors so they run clockwise when the vehicle is moving forward. This kit contains three batteries, two gear motors, two speed controllers, and one of everything else. ...
Availability: In Stock
Item #: KIT-191 -
This kit requires modifications to install. The battery pack, controller, motor, and reverse switch need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. With this kit the power switch is no longer wired in between the battery pack and controller, and there is an adapter (ADAPTER-CNX2.8M2-6.3F) that goes from the controller to the power switch This kit is available without a reverse switch as item #...
Availability: In Stock
Item #: KIT-194 -
This kit requires modifications to install. The battery pack, controller, and motor need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. This kit is available with a reverse switch as item # KIT-191.
Availability: In Stock
Item #: KIT-2301 -
24 Volt 350 Watt Electric Go Kart Power Kit This kit has a gear motor with a maximum shaft speed of 420 RPM so it is best suited for a go kart that you want to go slow and have a lot of torque. We have a Drivetrain Parts Selection Guide to help with determining the top speed and wheel or axle sprocket size to use with this kit. The motor in this kit has a factory-installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets, freewheels, freewheel to axle...