All Parts

Search for The Part You Need

24 Volt 3 Amp Automatic Battery Charger with 3-Port House Plug

24 Volt 3 Amp Automatic Battery Charger with 3-Port Inline Plug

24 Volt 3 Amp Automatic Battery Charger with 3-Prong House Plug           3-Prong House Plug

24 Volt 3 Amp Automatic Battery Charger with Coaxial Plug Included coaxial plug adapter with 5.5mm OD and 2.1mm ID coaxial plug. We also include a 5.5mm OD and 2.1mm ID to 5.5mm OD and 2.5mm ID adapter in case the charger port has a 2.5mm center pin.

24 Volt 3 Amp Automatic Battery Charger with Polarized C7 Plug

24 Volt 3 Amp Automatic Battery Charger with Polarized Plug

24 Volt 3 Amp Automatic Battery Charger with RCA Plug

24 Volt 300 Watt 2600 RPM Currie Electric Scooter Motor with 11 Tooth Sprocket Specifications: 24V (DC24V), 300W, 2600RPM (R/MIN), Base Mount Model: XYD-6A2 (Use model plus specifications to determine compatibility.) 11 tooth sprocket for #25 chain. Powerful four brush permanent magnet design with 100% ball bearing construction. Shaft rotation spins clockwise if you are facing the shaft. Shaft rotation reversible by reversing power leads. Weight 4.75 lbs.OEM Currie electric scooter motor....

24 Volt 30Ah LiFePO4 Electric Scooter or Bike Battery Bioenno Power® 24V 30Ah LiFePO4 electric scooter, electric bike, electric go-kart, electric beach cart battery. Dimensions: 7.7 x 5.6 x 5.8 inchesOutput Terminal: Anderson Powerpole SB50ACharger Port: Anderson Powerpole PP45Weight: 15.8 poundsNominal Voltage: 24 VoltsOpen Circuit Voltage Range: 25 to 29.2 VoltsCapacity: 30Ah (30 Amp hour)Maximum Continuous Discharge Current: 30 AmpsMaximum Peak Discharge Current: 60 Amps (5 Seconds)Maximum...

24 Volt 350 Watt 2600 RPM Currie Electric Scooter Motor with 15 Tooth Freewheel Sprocket Specifications: 24VDC (DC24V), 350W, 2600RPM (R/MIN), 22A, Front Mount Rated Current: 22A Model: XYD-6B (Use model plus specifications to determine compatibility.) XYD-6 is the most important part of the model number because the factory may use different characters after the XYD-6 for the same motors. Powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 15 tooth...

24 Volt 350 Watt Controller and Throttle with Key Switch and Battery Indicator Kit The only connections that need to be made with this kit are the thick yellow and blue wires to the motor, and the thick red and black wires to the battery pack. All other connectors are optional and do not need to be connected to anything for the controller to operate.The throttle has connectors that are wired to work with the controller. The controller and throttle connectors are labeled so they can be...

The red push button switch on the throttle is wired as the on/off power switch. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your project? Click below to view our full selection of sprockets and chains. Sprockets Chains ...

The red push button switch on the throttle is wired as the on-off main power switch. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your project? Click below to view our full selection of sprockets and chains. Sprockets Chains ...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The batteries in this kit are heavy so this kit weighs around 60 pounds. The motor in this kit has a 9 tooth sprocket for 1/2" x 1/8" (#410) bicycle chain. Need an axle sprocket, axle sprocket hub, or chain to complete your project? Click below to view our full selection of...

With this kit you get $530.40 of parts and labor for $477.00.The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.The batteries in this kit are heavy so this kit weighs around 60 pounds.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The battery pack wiring harness has 6.3mm ID ring terminals for larger batteries with top post terminals.The battery charger is 24 Volts 5 Amps and is large enough to charger a battery pack made from two 12 Volt 35 Ah batteries. The motor in this kit has a 9 tooth sprocket...

This kit contains a custom-made sprocket which takes around 5-10 business days to produce. The 36-tooth sprocket in this kit fits the Razor Dirt Quad's rear axle. This is a No Batteries (NB) kit and does not include the battery pack, battery charger, or charger port. 1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The key switch on the throttle turns the power on and off and the toggle switch activates forward and reverse. ...

The red push button switch on the throttle is wired as the on/off power switch.The motor's shaft and sprocket rotate clockwise so the motor needs to be installed in a position where its shaft and sprocket rotate clockwise when the cart is moving forward. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need...

The red button on the thumb throttle is wired as the on/off main power switch.The motor speed can be variably controlled from a full stop to full speed and everywhere in between with the included thumb throttle. The motor in this kit has an 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We carry wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Looking for sprockets and chain for your project?...

Two 12 Volt 10Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available...

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. (We Also Have A 3/4" Axle Version) Freewheel to axle...

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The 44 tooth sprocket is custom machined to fit onto the freewheel so please allow up to 5 business days for it to be made. The...

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available upon request. This...

Wires between key switch and controller are 48 inches long. Two 12 Volt 15Ah batteries. The key switch is wired as the on-off power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles, has a 1/4" keyway, and two set screws to hold it onto the...

Two 12 Volt 15Ah batteries. The key switch is wired as the on-off power switch. The motor's speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The motor has a factory installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. The motor's shaft runs in the clockwise direction. Need sprockets, axle adapters, freewheels, or chain? Click below to view our full selection of sprockets, axle adapters, freewheels, and...