All Parts

Search for The Part You Need

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets and chain for your...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. kitwithcustomsprocket

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch and the red switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The battery pack wiring harness has 6.3mm ID ring terminals for larger batteries with top post terminals.The battery charger is 24 Volts 5 Amps and is large enough to charger a battery pack made from two 12 Volt 35 Ah batteries. The motor in this kit has a 9 tooth sprocket...

This kit contains a custom-made sprocket which takes around 5-10 business days to produce. The 36-tooth sprocket in this kit fits the Razor Dirt Quad's rear axle. This is a No Batteries (NB) kit and does not include the battery pack, battery charger, or charger port. 1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The key switch on the throttle turns the power on and off and the toggle switch activates forward and reverse. ...

The red push button switch on the throttle is wired as the on/off power switch.The motor's shaft and sprocket rotate clockwise so the motor needs to be installed in a position where its shaft and sprocket rotate clockwise when the cart is moving forward. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need...

The red button on the thumb throttle is wired as the on/off main power switch.The motor speed can be variably controlled from a full stop to full speed and everywhere in between with the included thumb throttle. The motor in this kit has an 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We carry wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Looking for sprockets and chain for your project?...

Two 12 Volt 10Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available...

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. (We Also Have A 3/4" Axle Version) Freewheel to axle...

Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The 44 tooth sprocket is custom machined to fit onto the freewheel so please allow up to 5 business days for it to be made. The...

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available upon request. This...

Wires between key switch and controller are 48 inches long. Two 12 Volt 15Ah batteries. The key switch is wired as the on-off power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles, has a 1/4" keyway, and two set screws to hold it onto the...

Two 12 Volt 15Ah batteries. The key switch is wired as the on-off power switch. The motor's speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The motor has a factory installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. The motor's shaft runs in the clockwise direction. Need sprockets, axle adapters, freewheels, or chain? Click below to view our full selection of sprockets, axle adapters, freewheels, and...

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available upon request. This...

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 3/4" axles and has a 3/16" keyway. Freewheel to axle adapters for different size axles are available upon request....

24 Volt 350 Watt Gear Motor Output shaft speed: 300 RPM. Includes 9-tooth sprocket for #410 (1/2" x 1/8") bicycle chain. Powerful four-brush permanent magnet design. 100% ball bearing construction. 22" long power leads. Mounting bracket dimensions: 4-3/8" long x 2-3/16" wide. Motor dimensions: 4-1/8" outside diameter x 4-5/8" long excluding transmission and output shaft, 5-3/8" long including transmission and output shaft. The three front-mount threaded bolt holes are for M6 (M6x1) bolts and...

24 Volt 350 Watt Electric Go Kart Power Kit

24 Volt 350 Watt Electric Go Kart Power Kit

24 Volt 350 Watt Electric Go Kart Power Kit This kit has a gear motor with a maximum shaft speed of 420 RPM so it is best suited for a go kart that you want to go slow and have a lot of torque. We have a Drivetrain Parts Selection Guide to help with determining the top speed and wheel or axle sprocket size to use with this kit. The motor in this kit has a factory-installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets, freewheels, freewheel to axle...

24 Volt 350 Watt Electric Go Kart Power Kit The power switch is the rocker switch and the reverse switch is the toggle switch. Motor to controller wire length: 22 InchesBattery pack to controller wire length: 1 FootCharger port to controller wire length: 2 FeetPower switch to controller wire length: 6 FeetReverse switch to controller wire length: 6 FeetFoot throttle to controller wire length: 59 Inches ...

This kit contains two Freewheel Adapters for 5/8" Axle, two 12 Volt 15 Ah Batteries, and one of everything else.

Wire Routing

Same as KIT-2301 minus the charger port and including a throttle speed limit adjuster.

Same as KIT-2301 except with a plastic throttle instead of a metal throttle, and with an optional chain instead of with an included chain.

24 Volt 350 Watt Electric Scooter Motor 24 Volts350 Watts2800 RPMPowerful four brush permanent magnet design with 100% ball bearing construction.18" long power leads. 11 tooth sprocket for #25 chain with 10mm x 8mm D-bore.Shaft rotation reversible by reversing power leads.Mounting bracket measures 4-1/4" x 2-1/8" with 4 threaded mounting holes.Dimensions: 4"(H) x 4"(W) x 5-1/2"(L).Weight 5.2 lbs Cross references motor number: MY1016 Dimensions: PDF Compatibility: Some Chinese-made...

24 Volt 350 Watt Electric Scooter Motor

Wire Routing The motor in this kit has an 11 tooth sprocket for #25 chain. We have wheel and axle sprockets for #25 chain which are compatible with this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...

24 Volt 350 Watt 2600 RPM Currie Electric Scooter Motor With 11 Tooth Sprocket

24 Volt 4 Amp Automatic Battery Charger