Y

Premium Plus Foot Pedal Throttle 6-5/16" long x 2-3/16" wide throttle pedal. 4" x 2" mounting plate mounts onto any flat surface with three mounting holes. IP64 rated dust and water splash resitant construction. 45" long throttle cable. Wire colors: red, black, and white. This foot throttle's unique design and high-quality components provide a smoother and softer start than other types of foot throttles. Standard hall effect type throttle works with all of the speed controllers that we carry....

Brake Pad Set for BRK-732 Series Disc Brake Calipers Semi-metallic disc brake pads for BRK-732 disc brake calipers. Fits many makes and models of mechanical and hydraulic disc brake calipers. Every brake pad model has its own unique shape and size so if the new brake pad has the same shape and size as the brake pad that it is replacing then it will be the right one. Available in a Sintered Full-Metallic Version. Compatibility: (Manufacturers sometimes change brake caliper models mid-production...

Brake Pad Set for Varla Eagle One Electric Scooter with Zoom Hydraulic Brakes Set of two Zoom brand brake pads. For Varla Eagle One scooters with Zoom HB-875E hydraulic brakes. (Does not fit Zoom HB-875 hydraulic brakes.) Does not fit Varla Eagle One scooters with mechanical brakes. Electric scooter manufacturers sometimes change brake caliper models mid-production so compare the shape of this brake pad with the old brake pad before purchasing. Brake Caliper Compatibility Akantor: AK-920,...

Front Axle Retainer for 12mm Axle Nickel plated steel front axle retaining washer for 12mm axle. For electric and people powered scooters and bikes. This is a safety device which helps keep the front wheel on the forks if the axle nut becomes loose.

9 Tooth Sprocket with 10mm x 8.5mm Double D-Bore for #41 and #420 Chain For #41 and #420 chain.9 teeth.For motors with 10mm x 8.5mm double D-bore shafts.Hardened high carbon steel for long service life. Compatible with MY1020 Motors.

8-1/2x2 (50/75-6.1) Inner Tube with Straight Valve Stem with Mounting Nut and Backplate Straight valve stem with mounting nut and backplate.

48V 25W/10W Dual Contact Dual Filament Taillight Bulb 48 Volt 25 Watt / 10 Watt electric scooter and bike taillight bulb. Dual contact dual filament bulb. 15mm (approximately 9/16") wide base. Bulb is marked 56V 25/10W (Replaces 55V 25/10W bulbs) and is designed for 48 Volt electric scooters and bikes.

12V 18W/18W Dual Contact Dual Filament Headlight Bulb 12 Volt 18 Watt / 18 Watt electric scooter and bike headlight bulb. Dual contact dual filament bulb. 15mm (approximately 9/16") wide base.

48V 25W/25W Dual Contact Dual Filament Headlight Bulb 48 Volt 25 Watt electric scooter and bike headlight bulb. Dual contact dual filament bulb. 15mm (approximately 9/16") wide base. Bulb is marked 56V (56 Volts) and is designed for 48 Volt electric scooters.

Key Switch for Some Versions of eWheels EW-36 and EW-36 Elite Electric Scooters Warning: Does not fit all EW-36 versions. Remove the access panel and compare the original key switch to this key switch and confirm that they both look the same before ordering. Includes a separate bezel to match the style of the original bezel. The bezel is removed when installing this part and then replaced after installation is complete. ...

8x1-1/4 Inner Tube with 31 Degree Bent Valve Stem Valve stem has 31 degree bend.Valve stem is at a 45 degree angle to the rim. (A 0 degree angle is parallel to the rim and a 90 degree angle is perpendicular to the rim.)

8x1-1/4 Inner Tube with 65 Degree Bent Valve Stem Valve stem has 65 degree bend.Valve stem is at a 45 degree angle to the rim. (A 0 degree angle is parallel to the rim and a 90 degree angle is perpendicular to the rim.)