Y

Full-Size Street Scooter Handlebar Mount Switch for High and Low Beams, Turn Signals, and Horn Handlebar mounted switch cluster for full-size street electric scooters and e-bikes. Switches for high and low headlight beams, turn signals, and horn. Threaded on top for mirrors with 8mm right hand threads. 9" long cable with 8-wires and 8-pins in a 9-pin white connector. Fits standard 7/8" (22.2mm) electric scooter and bicycle handlebars. 9-pin wiring connector mates with connector item # CNX-55. ...

Full-Size Street Scooter Handlebar Mount Switch for High and Low Beams, Turn Signals, and Horn Handlebar mounted switch cluster for full-size street electric scooters and e-bikes. Switches for high and low headlight beams, turn signals, and horn. Threaded on top for mirrors with 8mm right hand threads. 9" long cable with 8-wires and 8-pins in a 9-pin white connector. Fits standard 7/8" (22.2mm) electric scooter and bicycle handlebars. 9-pin wiring connector mates with connector item # CNX-55. ...

Fuse Holder and Relay Connector Terminals for 14-12 Gauge Wire With locking tab that snaps into fuse holder or relay connector socket.Crimp or solder on wire terminals for 14 through 12 AWG wire.

Fuse Holder and Relay Connector Terminals for 16-18 Gauge Wire With locking tab that snaps into fuse holder or relay connector socket.Crimp or solder on wire terminals for 16 through 18 AWG wire.

GMA Fuse Holder with Cap Fuse holder for 3/16"x3/4" (5x20mm) glass fuses. Suitable for electric scooters and bikes that use 30 Amp or lower rated fuses. 15 Amp continuous duty rating rating. Solder terminals. Fits 9/16" (15mm) hole. Mounting hardware included.

Xiaomi M365 Electric Scooter Brake Lever

Hand Operated Tire Air PumpThis is a small, lightweight, and convenient air pump that is light enough to bring the air with you wherever you go. Weighs less than half a pound and is only 8-1/4" tall when the handle is placed all the way down. 

Handlebar End Safety Lights CNC Machined Aluminum Handlebar End LED Safety Lights Place Into Handlebar Ends and Twist End of Lights to Expand Silicone Ball and Secure Into Place Press the Opaque Silicone End Cover to Turn Red LED Lights On and Off Batteries are Included and Installed

Handlebar Grip Set for Electric Bike Pair of short handlebar grips for electric bicycles. Each grip is 3 inches long. Most commonly used on electric bikes with a twist shifter on the left and a half-length twist throttle on the right.

Handlebar Grips for Razor ScootersFits the following models:Power Core E90 ScooterPower Core E95 Scooter

Handlebar Mount Switch Cluster with Indicator Lights for Turn Signals, Lights and Horn Voltage: 36 Volts through 48 Volts (36V-48V). 56 Volt (56V) Maximum Current: 1 Amp (1A) Maximum For 7/8" (22.2mm) handlebars. 78" (2000mm) long wire cable. IPX4 water resistant. The turn signal switches operate independently so the left turn signal can be on, the right turn signal can be on, or both turn signals can be on at the same time for hazard lights. We carry Compatible Wire Connectors for this...

Handlebar Mount Water Bottle Holder Fits 7/8" (22mm) OD Handlebars