Y

Replacement Press Pin for CHB-2500 Chain Breaker ToolReplacement press pin for CHB-2500 Chain Breaker Tool.

Brake Pad Set for BRK-750 Series Disc Brake Calipers Sintered full-metallic disc brake pads for BRK-750 Series disc brake calipers. Sintered Metallic Brake Pad Material for Improved Wear and Friction Properties Longer Lasting and Better Stopping Power Than Semi-Metallic Brake Pads For Toopre, Tolids, and LeBicycle disk brake calipers. Available in a Semi-Metallic Version. This brake pad's tail may sometime be a little longer or shorter than the one in the photo, however, a longer or shorter...

5-1/2 Foot Long Brake Cable 66" (5-1/2 foot) long universal fit brake cable with barrel shaped brake lever connector head.Fits most electric scooters and bikes. Trim cable down to size needed after installation.

Right Hand Brake Lever with Switch and Parking Brake Right hand three finger pull brake lever with parking brake. Apply the brake and then push on the black parking brake lever to set the parking brake. Apply the brake again to automatically release the parking brake. Steel parking brake lever. Aluminum brake lever with black enameled aluminum base. Built-in brake switch with 11" long cable. Lever has return spring. High-profile design reaches over handlebar grips and controls. Brake switch is...

1-7/8" (47mm) OD Headset Cup and Bearing Set Electric scooter, moped, and bike front forks headset bearing set with chrome plated finish.For 1-1/8" (28.6mm) OD handlebar stem.For 1-1/4" (31.8mm) OD front fork steerer tube.Seat: 1-7/16" (36.8mm) ODCup: 1-7/8" (47mm) OD, 1-3/4" (45mm) ID ...

Freewheel to Motor Adapter with M35x1.00 Right Hand Threads Freewheel adapter with M35x1.00 right hand (clockwise) threads. Freewheel engages when the motor's shaft rotates clockwise. 11mm ID, 4mm wide x 2mm deep keyway. 10mm wide mounting hub. Made from yellow zinc plated steel.Related Parts Compatible with 11mm Shaft Gear Motors ...

3 Pin Black Nylon XLR Charger Port with Wires and Connector 9" long wires with female connector that has 2.8mm wide blade terminals. Charger port is wired with red wire to terminal 1 and black wire to terminal 2.Connector is wired as shown below.

24V 5W Equivalent LED Taillight and Turn Signal Bulb 24 Volt, 5 Watt equivalent LED electric scooter and bike tail light and turn signal bulb. Advanced COB LED lamp. Consumes 1.5 Watts and outputs 120 Lumens which is the equivalent of a 7.5 Watt incandescent bulb. 15mm (approximately 9/16") wide base.