Search Results for "kit"

We install matching connectors on every part of this kit and label them so all you have to do is plug the parts together. This MX500, MX650 and SX500 modification kit is 100% plug-and-play and the motor and batteries install on the bike without any frame or body modifications. The 15Ah batteries in this kit have a higher capacity than the bike's original 12Ah batteries, however, the bike's original battery charger can be used to charge them so a new battery charger is not included with this...

This is an NB (no batteries) series kit which requires a 36 Volt battery pack to use. This kit is also Available With Batteries. This kit requires modifications to install. The battery pack, controller, motor, and reverse switch need to be custom mounted. The axle sprocket and throttle will fit on the Dirt Quad without modifications. Geared for a top speed of around 15 MPH. With this kit the power switch is no longer wired in between the battery pack and controller, and there is an adapter...

Powered, geared, and test proven for speeds up to 26 MPH. The key switch on the throttle is wired as the bike's main on-off power switch. The bike's original power switch activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at a reduced power level for slower speeds and a longer range and ride-time. This modification kit requires custom installation (mounting) of the batteries (batteries not included) and the...

The controller can be programmed to run the motor in the clockwise or counterclockwise direction.A switch can be wired to the controller to operate the controller's reverse function. The red push-button switch on the throttle is wired as the on-off power switch. This kit is available with a 48V 15Ah battery pack as: item # KIT-481600-32 This kit contains the following parts and labor (click below for details): ...

Shipping weight is 95 pounds. Wire Lengths: Power switch to controller wire length 59"Foot throttle to controller wire length 59"Battery pack to controller wire length 18"Motor to controller wire length 22"Charger port to controller wire length 18" Kit Features: Motor operates in the clockwise direction and is not reversable. Kit includes two 48 Volt 15Ah battery packs and two battery pack wiring harnesses. Kit includes one battery charger port adapter to recharge battery pack off of the...

24 Volt 750 Watt XYD-6B Motor, 24 Volt 1000 Watt Controller, and Twist Throttle Kit We install matching connectors on every part of this kit and label them so installation will be plug-and-play. The MOT-SD175 motor's shaft spins counter clockwise if you are facing the shaft. This shaft rotation is reversible by reversing motor to controller wire polarities.

Two 12 Volt 15Ah batteries. The red button on the thumb throttle is wired as the power switch. When this kit is used with 12" (30cm) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included thumb throttle. The freewheel to axle adapter in this kit fits 1" axles and has a 1/4" keyway. Freewheel to axle adapters for different size axles are available upon request. This...

This is not a bolt-and-go kit. This is a modification kit that requires custom installation of motor, speed controller, and battery pack. The original power switch, charger port, and brake lever are reused with this kit and connect to the controller with the provided adapters. The chain included with this kit will be oversized so it can be shortened to the correct length after the motor and wheel sprocket are installed. All connectors and adapters are labeled for easy plug-and-play wiring...

Powered, geared, and test proven for speeds up to 26 MPH. The switch on the throttle activates the speed limiter function of the controller. When the controller's speed limiter function is switched on the motor will operate at reduced power for slower speeds and a longer ride-time. The motor in this kit is the same size as the original motor and directly replaces it with only one metal tab spacer needing to be cut off the bike's frame so the motor's power cord does not hit it, and one 1/4"...

24 Volt 500 Watt Controller with Reverse and Throttle with Battery Indicator Kit The throttle has connectors that are wired to work with the controller. The controller and throttle connectors are labeled so they can be assembled without any guesswork. The throttle includes a matching left hand grip. The grips are covered with clear plastic to protect them until after they have been installed.The labor fee has been waived for this kit. ...

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric bicycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit.  The push button switch on the THR-132 throttle turns the power on and off.

We install matching connectors on every part of this kit and label them so all you have to do is plug the parts together. Every part of this kit except for the battery is a direct fit onto the bike. The LiFePO4 battery in this kit is 9.5" x 7.2" x 5.8" and requires custom installation. This kit contains the following parts and labor (click below for details):