Products 1-12 of 61
Show
Click here to see item numbers 
Availability: In Stock
Item #: KIT-145-10 -
1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. Need sprockets or chain? Click below to view our full selection of sprockets and chains. Sprockets Chains ...
Availability: In Stock
Item #: KIT-140-A -
The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or additional chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. SprocketsAxle Sprocket Hubs Chains ...
Availability: Out of Stock
Item #: KIT-481000G-10 -
Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward. The red push button switch on the throttle is the on/off power switch and the toggle switch is the forward/reverse switch. This kit has four large batteries so the shipping...
Availability: In Stock
Item #: KIT-481000G-12 -
Wire Routing Chart Select the wire lengths of the kit above. We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. For optimal power and performance the motor should be installed so its shaft rotates clockwise when the vehicle is moving forward. The key switch is the on/off power switch and the red push button switch on the throttle is the forward/reverse switch. The motor in this kit has a factory-installed 11 tooth...
Availability: In Stock
Item #: KIT-328-C1 -
Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The 44 tooth sprocket is custom machined to fit onto the freewheel so please allow up to 5 business days for it to be made. The...
Availability: Out of Stock
Item #: KIT-328-C34 -
Two 12 Volt 15Ah batteries. The red button on the twist throttle is wired as the on/off main power switch. When this kit is used with Wheeleez 30cm (11.8" diameter) wheels the top speed is around 3 MPH, which is normal walking speed. The motor speed can be variably controlled from a full stop to top speed and everywhere in between with the included twist throttle. The 44 tooth sprocket is custom machined to fit onto the freewheel so please allow up to 5 business days for it to be made. The...
Availability: In Stock
Item #: KIT-24650-5 -
Wire Routing Chart This kit was originally made for converting a gas engine powered DR Powerwagon self-propelled wheelbarrow to electric power, however, it can be used for powering beach wagons and carts or anything that needs to run at a slow speed and have a lot of power. #420 chain with a master link options are available in the Choose Your Options area. We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. The throttle in...