All Parts

Search for The Part You Need

60 Volt 5 Amp Automatic Battery Charger with 3-Port Plug For 60 Volt lead-acid battery packs.

60 Volt 80 Amp Bosch Type SPDT Relay 60 Volt DC Coil80 Amp ContactsSingle Pole Double Throw (SPDT)5 TerminalsRelay Dimensions: 1" x 1" x 1" Excluding TerminalsTerminal Dimensions: 1/4" (6.3mm) Wide x 3/8" (10mm) Long

60 Volt 60 Amp Bosch Type SPDT Relay with Mounting Tab

60 Volt 80 Amp SPDT Wide-Pin Relay

60 Volt Battery Pack Wiring Harness with Fuse Holder and 5mm Ring Terminals 24" battery to connector wires.10" battery jumper wires. 5" fuse holder wires.5.2mm ID ring terminals.Fuse holder for ATO fuse.

60 Volt Battery Pack Wiring Harness with Fuse Holder Made from 12 Gauge Stranded Copper Wire5.4mm ID Ring TerminalsCNX-82M Black Plastic Controller ConnectorBuilt-In Fuse Holder for ATO/ATC Fuse

60/65-6.9 Tubeless Tire for Electric Scooter Compatibility: Rear Tire for Segway/Ninebot MAX G2 Electric ScooterRear Tire for Segway/Ninebot G65 MAX II Electric ScooterPlus many other makes and models. Related Parts Straight Valve Stem with 11mm Seat for Tubeless Tire

60/70-6.5 Tubeless Tire for Electric Scooter Compatibility: Ninebot MAX G30 Electric Scooter Front Tire for Segway/Ninebot MAX G2 Electric Scooter Front Tire for Segway/Ninebot G65 MAX II Electric Scooter Plus many other makes and models. Related Parts Straight Valve Stem with 11mm Seat for Tubeless Tire

60/72 Volt 1000 Watt Electric Scooter/Moped/Bike Brushless Motor Speed Controller (CW or CCW with Optional Reverse) Designed for 60V and 72V brushless DC motors between 1000 and 1200 Watts. Programmable to operate motor in clockwise or counterclockwise direction and has a reverse function which is optional to use. Replaces controllers with fewer connectors because most of the connectors are optional to use. Automatically selects under Voltage protection of 52 Volts with 60 Volt battery packs...

6000 RS Sealed Wheel Bearing High quality 6000RS sealed wheel bearing.This bearing has rubber sides that make a seal to keep dirt, dust, water, and moisture out of the bearing for a longer service life. Replaces 6000RS and 6000-2RS bearings. Dimensions: 10mm ID, 26mm OD, 8mm wide All of the wheel bearings that we carry are premium motor-grade bearings made from fully hardened SAE 52100 high carbon chromium steel. Their dimensional accuracy is 0.01mm or better and they are rated for rotational...

6000 Z Sealed Wheel Bearing High quality 6000Z sealed wheel bearing. Replaces 6000Z and 6000ZZ bearings. Dimensions: 10mm ID, 26mm OD, 8mm wide All of the wheel bearings that we carry are premium motor-grade bearings made from fully hardened SAE 52100 high carbon chromium steel. Their dimensional accuracy is 0.01mm or better and they are rated for rotational speeds up to 6,000 RPM. Bearings of this quality level are usually not required for use as wheel bearings, however, they will outperform...

6001RS Sealed Wheel Bearing 6001RS rubber-sided sealed wheel bearing.Replaces 6001RS and 6001-2RS bearings.Size: 12mm ID, 28mm OD, 8mm WidePremium wheel bearing made from fully hardened SAE 52100 high carbon chromium steel.Dimensional accuracy is 0.01mm or better.Rated for rotational speeds up to 6,000 RPM.

6001Z Shielded Wheel Bearing 6001Z steel-sided shielded wheel bearing.Replaces 6001Z and 6001ZZ bearings.Size: 12mm ID, 28mm OD, 8mm WidePremium wheel bearing made from fully hardened SAE 52100 high carbon chromium steel.Dimensional accuracy is 0.01mm or better.Rated for rotational speeds up to 6,000 RPM.

6002 RS Sealed Wheel Bearing This is the same bearing as those marked 6002RS, 6002-RS, and 6002-2RS.Dimensions: 15mm ID, 32mm OD, 9mm wide Compatibility: Razor DXT Electric Drift Trike Rear WheelsPlus Many Other Makes and Models

Premium quality 6003 RS sealed wheel bearing. Replaces 6003RS and 6003-2RS bearings.Size: 17mm ID, 35mm OD, 10mm wide

BRG-6003RS, 6003 RS Sealed Wheel Bearing

BRG-608RS, 608 RS Sealed Wheel Bearing

BRG-608Z, 608 Z Shielded Wheel Bearing

60V 10W/5W Dual Contact Dual Filament Taillight Bulb 60 Volt 10 Watt / 5 Watt electric scooter and bike taillight bulb. Dual contact dual filament bulb. 15mm (approximately 9/16") wide base. Bulb is marked 70V 10/5W and is designed for 60 Volt electric scooters. Compatibility X-Treme Cabo Cruiser Elite 60 Volt Plus many other makes and models. Bulb Details and Dimensions ...

60V 25W Single Contact Single Filament Headlight Bulb

60V 25W/25W Dual Contact Dual Filament Headlight Bulb

60V 3W Amber Bulb 60 Volt, 3 Watt amber electric scooter and bike bulb. Bulb is marked 70V (70 Volts) and is designed for 60 Volt electric scooters and bikes. Compatibility X-Treme Cabo Cruiser Elite 60 Volt Plus Many Other Makes and Models

60V 3W Taillight and Turn Signal Bulb (BLB-603)

61 Inch Drum Brake Cable for Electric Scooters and Bikes, Type 2 61 inches long from end to end of the brake cable housing. Rear wheel drum brake cable.

61 Tooth Sprocket for #35 Chain with F4 Mounting Pattern Made from Tempered (Hardened) Aircraft Grade Aluminum Alloy61 TeethFor #35 ChainF4 Mounting Pattern54.1mm BoreFour 6.2mm ID Bolt Holes Equally Spaced @ 90 Degrees65mm Bolt Circle Diameter

62 Links Of 8mm Chain With Master Link

62 Tooth Sprocket for #219 Chain with R76-8 Mounting Pattern Made from Tempered (Hardened) Aircraft Grade Aluminum Alloy R76-8 Mounting Pattern62 TeethFor #219 Chain76mm ID BoreFour 8.5mm ID Bolt Holes Equally Spaced @ 90 Degrees92mm Bolt Circle Diameter Known Compatibility For converting some Bladez scooter models from #25 chain to T8F (8mm) chain. Fits some Bladez electric scooter rear wheels (measure existing sprocket to confirm that it is the same size before ordering). --> ...

62 Tooth Sprocket for #40 Chain with 1 Inch ID Bore Made from Tempered Aircraft Grade Aluminum Alloy 62 Teeth For #40 Chain (For #40 Chain Only, Not Compatible With #41 or #420 Chain) 1 Inch Bore

62 Tooth Sprocket for #40 Chain with Custom Mounting Pattern Made from Tempered Aircraft Grade Aluminum Alloy 62 Teeth For #40 Chain (For #40 Chain Only, Not Compatible With #41 or #420 Chain) Custom Mounting Pattern 3 Inch Bore Four 0.344 Inch ID Bolt Holes Equally Spaced @ 90 Degrees 3.625 Inch Bolt Circle Diameter

62 Tooth Sprocket for #420 Chain with R76-8 Mounting Pattern Made from Tempered (Hardened) Aircraft Grade Aluminum Alloy R76-8 Mounting Pattern62 TeethFor #41 and #420 Chain76mm ID BoreFour 8.5mm ID Bolt Holes Equally Spaced @ 90 Degrees92mm Bolt Circle Diameter Known Compatibility For converting some Bladez scooter models from #25 chain to T8F (8mm) chain. Fits some Bladez electric scooter rear wheels (measure existing sprocket to confirm that it is the same size before ordering). --> ...

62 Tooth Sprocket for 8mm Chain 161mm (6-5/16") OD.54mm (2-1/8") ID.4mm thick.F4 mounting pattern.Adjacent mounting bolt holes are spaced 47mm (1-3/8") apart from center to center.Made from steel with a nickel-plated finish. Bolts directly onto 4-hole freewheels. Sprockets with F4 mounting pattern are compatible with F4 Freewheels.