Y

3PS Battery Charger Port3-Pin Battery Charger Port with 3/8" ID Insert Area

2PS Battery Charger Port2-Port Battery Charger Port with 3/8" ID Plug Opening

Nickel-Plated Steel Seat Clamp

Black-Enameled Steel Seat Clamp

Same as EVO-PORT2009

Shock Absorber Mounting Nut and Bolt Shock absorber mounting nut and bolt for electric scooters, bikes, and go-karts.Fits 8mm ID x 24mm Long Shock SleevesNut Shaft: 7.9mm OD x 28.5mm LongNut and Bolt Heads: 13.5mm OD5mm Hex Wrench Required to Remove/Install We also carry a Shock Absorber Mounting Sleeve and Spacers

Shock Absorber Mounting Sleeve and Spacers Shock absorber mounting sleeve with two nylon spacers for electric scooters, bikes, and go-karts.Sleeve: 12mm OD x 8mm ID x 24mm LongSpacers: 12mm ID x 18mm OD x 5mm Thick We also carry a Shock Absorber Mounting Nut and Bolt

24V 250W Variable Speed Controller Designed for 24 Volt 250 Watt motors. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Uses standard 3-wire variable speed hall-effect throttle.Sealed housing makes this controller water resistant. Wiring Directions

36V 500W E-Scooter and E-Bike Speed Controller Designed for 36 Volt motors up to 500 Watts. Maximum current 25 Amps. Under Voltage protection 31 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric scooter and bicycle models. Item...