Y

44 Tooth Steel Sprocket for #410 (1/2" x 1/8") Bicycle Chain with F4 Mounting Pattern Made from Zinc-Plated Steel For #410 (1/2" x 1/8") Bicycle Chain 44 Teeth F4 Mounting Pattern 2.13" (54.1mm) ID Four 0.244" (6.2mm) ID Bolt Holes Equally Spaced at 90 Degrees 2.559" (65mm) Bolt Circle Diameter

45 Amp DC Circuit Breaker

45 Degree Bent Valve Stem with 11mm Seat for Tubeless Tire 11mm seat for mounting to a rim with an 8.8mm-9.5mm valve stem hole.45 degree bend in valve stem. Ready to install. Includes valve stem core and valve stem cap. Known Compatibility: Fits Many Electric Scooter Makes and Models

45 Degree Bent Valve Stem with 12mm Seat for Tubeless Tire 12mm seat for mounting to a rim with a 9.5mm-10mm valve stem hole.45 degree bend in valve stem. Ready to install. Includes valve stem core and valve stem cap. Known Compatibility: Fits Many Electric Scooter Makes and Models

45 Degree Bent Valve Stem with 14mm Seat for Tubeless Tire 14mm seat for mounting to a rim with a 10mm-10.5mm valve stem hole.45 degree bend in valve stem. Ready to install. Includes valve stem core and valve stem cap. Known Compatibility: Fits Many Electric Scooter and Motorcycle Makes and Models

45 Degree Bent Valve Stem with 15mm Seat for Tubeless Tire 15mm seat for mounting to a rim with an 11.5mm (0.453") valve stem hole.45 degree bend in valve stem. Ready to install. Includes valve stem core and valve stem cap. Known Compatibility: Fits Many Electric Scooter and Motorcycle Makes and Models

47 Inch Drum Brake Cable for Electric Scooters and Bikes, Type C 47 inches long from end to end of the brake cable housing. Front or rear wheel drum brake cable.

48 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, mopeds, and bikes with 48 Volt lighting systems. 48 Volts DC.Rated for loads between 0.02 Watts through 42 Watts.Maximum momentary load 150 Watts.Works with both Incandescent and LED bulbs.Built-in beeper sounds when lights are flashing. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1" x 1-1/8" x 1-1/8" excluding tab terminals. ...

48 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, mopeds, and bikes with 48 Volt lighting systems. 48 Volts DC.Rated for loads between 0.02 Watts through 42 Watts.Maximum momentary load 150 Watts.Works with both Incandescent and LED bulbs.Built-in beeper sounds when lights are flashing. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1" x 1" x 1-1/8" excluding tab terminals. ...

48 Volt 80 Amp Bosch Type SPDT Relay48 Volt DC Coil80 Amp ContactsSingle Pole Double Throw (SPDT)5 TerminalsRelay Dimensions: 1" x 1" x 1" Excluding TerminalsTerminal Dimensions: 1/4" (6.3mm) Wide x 3/8" (10mm) Long

48 Volt 80 Amp SPDT Wide-Pin Relay

24 Volt Red LED Power Indicator Lamp (LIT-10)