Y

3 Wire 3 Position Key Switch with Black Plastic Body Electric scooter and bike key switch with 3 wires and 2 keys. Three position off-on-on key switch. Key removable in off position only. Position 1 is for scooter on with lights off, and position 2 is for scooter on with lights on. This key switch has a tab that lock the switch into position after it is pushed into the mounting hole. Universal size key switch fits many electric scooters, mopeds, bikes, and go karts with plastic key switches....

3-Pin Female Black Wire Connector with Wires With 3" long 22 gauge attached wires.

3-Pin Male Black Wire Connector with Wires

3-Terminal Junction Box with CoverCovered junction box with three studs for electric scooters, bikes, and go-karts. Used to connect brushless DC (BLDC) motor to controller wires. Three 5mm threaded studs molded into the box. Includes three serrated flange lock nuts. Premium quality high-temperature electrical junction box made from unmeltable Bakelite. 2" wide x 1-1/2" deep x 7/8" high

3.00-10 Street Scooter Inner Tube with Bent Valve Stem Inner tube for electric street scooters, bikes and mopeds. Valve stem has 80 degree bend and 90 degree angle. Compatible with 3.00-10, 70/90-10, 80/80-10, 80/90-10, 90/70-10, and 90/80-10 tires.

3.00-4 (10x3.00-4, 10x3x4, 300-4, 260x85) Inner Tube with Bent Valve Stem

3.00/3.50-10 Street Scooter Inner Tube with Bent Valve Stem Inner tube for electric street scooters, bikes and mopeds. 85 degree bent valve stem. This tube has been replaced with one of the tubes listed below depending on what size tire it is being used with: 3.00-10 Inner Tube (item # TUB-3.00-10) 3.50-10 Inner Tube (item # TUB-3.50-10) ...

3.15 Inch OD 17mm Double D-Bore Motor Pulley for V-Belt For 1/2" V-belts. 3.15" outside diameter. 17mm x 12mm double D-bore inside diameter. Compatible with most MY1020Z, ZY1020Z, MY1020ZXFH, and MY1418ZXF gear motors.

3.3 Inch Kickstand for Small Electric Scooters Made from high carbon steel with a black enamel finish. Compatibility Many other electric scooter makes and models.

3.50-10 Street Scooter Inner Tube with Bent Valve Stem Inner tube for electric street scooters, bikes, and mopeds. Compatible with 3.50-10, 90/90-10, 100/80-10, and 100/90-10 tires. Valve stem has 60 degree bend and 90 degree angle.

3.50-4 Bent Valve Inner Tube For tires with a 10" outside diameter.Bent valve stem. Compatible with the following tire sizes: 4.10-3.50/4410-350/44.10/3.50-4410/350-44.10-4410-44.10x4410x43.50-4350-43.50x4350x4