Products 133-144 of 192
Show
Click here to see item numbers
Out of Stock
Availability: In Stock
Item #: KIT-140-NB -
The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. Sprockets Axle Sprocket Hubs Chains ...
Out of Stock
Availability: In Stock
Item #: KIT-157-B -
The two gear motors in this kit have clockwise shaft rotation and should be used with clockwise shaft rotation for best performance. When these gear motors are run counterclockwise their shaft speed will be slower then when run clockwise, so we recommend installing both motors so they run clockwise when the vehicle is moving forward. This kit contains three batteries, two gear motors, two speed controllers, and one of everything else. ...
Out of Stock
Availability: In Stock
Item #: KIT-2301 -
24 Volt 350 Watt Electric Go Kart Power Kit This kit has a gear motor with a maximum shaft speed of 420 RPM so it is best suited for a go kart that you want to go slow and have a lot of torque. We have a Drivetrain Parts Selection Guide to help with determining the top speed and wheel or axle sprocket size to use with this kit. The motor in this kit has a factory-installed 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets, freewheels, freewheel to axle...
Out of Stock
Availability: In Stock
Item #: KIT-24450-12 -
Wire Routing The motor in this kit has a factory-installed 10 tooth sprocket for #420 chain. We carry wheel and axle sprockets, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. We carry an 11 tooth motor sprocket for #410 (1/2" x 1/8") bicycle chain which fits the motor in this kit and can be added to your order from this page: 11 Tooth 17mm Dual D-Bore Sprocket for 1/2" x 1/8" Bicycle Chain Need sprockets, axle hubs, freewheel to axle...
Out of Stock
Availability: In Stock
Item #: KIT-24450G-30 -
Wire Routing Chart The motor needs to be mounted so its shaft rotates in the clockwise direction when facing the sprocket end of the motor. Kit weight 72 pounds, shipping weight 75 pounds. Need sprockets and chain for your project? Click below to view our full selection of sprockets and chains. Sprockets Chains ...
Out of Stock
Availability: In Stock
Item #: KIT-328 -
The red button on the thumb throttle is wired as the on/off main power switch.The motor speed can be variably controlled from a full stop to full speed and everywhere in between with the included thumb throttle. The motor in this kit has an 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We carry wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Looking for sprockets and chain for your project?...
Out of Stock
Availability: In Stock
Item #: KIT-361000-05 -
Battery Jumper Wires = 5" LongBattery to Speed Controller Connector Wires = 24" long The motor in this kit has an 11 tooth sprocket for 8mm chain. We have wheel and axle sprockets for 8mm chain which are compatible with this kit. We also have sprockets for #25, #35, and #420 chain which fit the motor in this kit. Click below to view our full selection of sprockets and chains. Sprockets Chains ...
Out of Stock
Availability: In Stock
Item #: KIT-361000-07 -
Wire Routing Chart Select the wire lengths of the kit above. The sprocket installed on this kit's motor is for 8mm chain, however, we also have sprockets for #25, #35, and #420 chain that fit this motor. The links below lead to the different sprockets and chains that can be used with this kit. SprocketsChain ...