Sayoon

Throttle for Pulse Electric Scooters Fits the following Pulse electric scooter models: Bolt Charger GRT-11 Lightning Lightwave Reverb RK9

24 Volt 150 Amp Power Contactor 24V DC 150A continuous duty SPST power contactor. Normally open contacts rated at 150 Amps continuous duty. Coil power consumption 8 Watts. Two 6mm contacts mounting posts work with 1/4" ring terminals and two 4mm coil mounting posts work with #8 ring terminals. Mounting posts include flat washers, lock washers, and nuts. 2-7/16" wide steel mounting plate on back of solenoid with two 6mm (1/4") diameter mounting holes spaced 1-13/16" apart from center to center....

36 Volt 150 Amp Power Contactor 36V DC 150A continuous duty SPST power contactor. Normally open contacts rated at 150 Amps continuous duty. Coil power consumption 8 Watts. Two 6mm contacts mounting posts work with 1/4" ring terminals and two 4mm coil mounting posts work with #8 ring terminals. Mounting posts include flat washers, lock washers, and nuts. 2-7/16" wide steel mounting plate on back of solenoid with two 6mm (1/4") diameter mounting holes spaced 1-13/16" apart from center to center....

48 Volt 150 Amp Power Contactor 48V DC 150A continuous duty SPST power contactor. Normally open contacts rated at 150 Amps continuous duty. Coil power consumption 8 Watts. Two 6mm contacts mounting posts work with 1/4" ring terminals and two 4mm coil mounting posts work with #8 ring terminals. Mounting posts include flat washers, lock washers, and nuts. 2-7/16" wide steel mounting plate on back of solenoid with two 6mm (1/4") diameter mounting holes spaced 1-13/16" apart from center to center....

60 Volt 150 Amp Power Contactor 60V DC 150A continuous duty SPST power contactor. Normally open contacts rated at 150 Amps continuous duty. Coil power consumption 8 Watts. Two 6mm contacts mounting posts work with 1/4" ring terminals and two 4mm coil mounting posts work with #8 ring terminals. Mounting posts include flat washers, lock washers, and nuts. 2-7/16" wide steel mounting plate on back of solenoid with two 6mm (1/4") diameter mounting holes spaced 1-13/16" apart from center to center....

24-36V 1000W Electric Cargo Tricycle and Truck Speed Controller 24-36 Volt input range. Suitable for 24 Volt motors up to 1200 Watts and 36 Volt motors up to 1800 Watts. Heavy-duty design with large cooling fins for demanding applications. Compatible with standard 3-wire variable speed hall-effect throttles. Works with both 24 Volt and 36 Volt battery packs. Compatible with standard brushed DC motors and series wound DC motors. Engineered to have a low frequency pulse width modulation which...

48-60V 1000W Electric Cargo Tricycle and Truck Speed Controller 48-60 Volt input range. For 48 and 60 Volt DC motors up to 1000 Watts. Heavy-duty design with large cooling fins for demanding applications. Compatible with all standard 3-wire variable speed hall-effect throttles. Works with both 48 Volt and 60 Volt battery packs. Compatible with standard brushed DC motors and series wound DC motors. Engineered to have a low frequency pulse width modulation which allows it to run cooler and...

Premium Full Length Twist Throttle with Chrome End Caps and Matching Grip Standard premium full length twist throttle with matching left hand grip. 4-1/8" grip length. Fits 7/8" (22mm) handlebars. Grips have chrome-plated plastic end caps. Wire colors: black, red, and green. 62" long throttle cable. Wiring Directions

Twist Throttle for Pulse Charger Electric Scooter PCH-THROTTLEThrottle for Avigo Extreme Motorcross Electric Dirt Bike AVG-THROTTLE1

Premium Full Length Twist Throttle with Matching Grip Standard full length throttle with matching left hand grip. 4-1/8" grip length. Fits 7/8" (22mm) handlebars. Wire colors: black, red, and green. 62" long throttle cable with male terminals for white wire connectors. The most common connector for this throttle is CNX-52. Wiring Directions ...

Premium Foot Pedal Throttle Premium heavy-duty foot pedal throttle. This foot throttle has the largest pedal and smoothest pedal response feel of any of our foot throttles. Made from reinforced nylon and cast aluminum with electroplated steel fasteners. 7" long x 2-3/16" wide throttle pedal. Mounting plate on bottom of throttle measures 3-3/8" X 2-3/16". Mounts onto any flat surface with three 5/16" ID mounting holes. IP64 rated dust proof and water splash proof construction. 59" long throttle...

Plastic Foot Throttle Heavy-duty plastic foot pedal throttle. Wire colors: black, red, and white. 49" long throttle cable with 3 pin white throttle to speed controller connector. Overall dimensions are 3-5/8" tall x 3-1/8" long x 2" wide. Four 1/4" ID mounting holes. Base measures 3-1/8" long x 1-3/4" wide. Base and footplate are made from 1/4" thick plastic. White wire connector mates with item # CNX-52. Wiring Directions ...