Select Wire Lengths In the Options Box Above
Both of the motors spin clockwise when the controller is in the forward direction mode. The motors in this kit have forward brush timing so they spin at different speeds in the clockwise and counterclockwise directions. Due to this both motors should be installed so they spin clockwise when the vehicle is moving forward.
The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the SWT-95 toggle switch is wired as the on/off main power switch. These functions of these switches could be changed upon request.
The motors in this kit have a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain and two 19 tooth motor sprockets for #25 chain are included with the kit.
We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit.
Need sprockets or chain for your project? Click below to view our full selection of sprockets and chains.