All Parts

Search for The Part You Need

Aftermarket Battery Wiring Harness for Minimoto Maxii Electric Pocket Bike Allows replacing the single 36 Volt battery with item # MMX-BATTERYSET Battery Set which is sold separately. Battery Pack Wiring Directions View More Minimoto Maxii Parts ...

Aftermarket Brake Caliper for Razor MX500, MX650, and SX500 (For 2mm Brake Rotors) Aftermarket brake caliper assembly with brake pads and mounting hardware for the Razor Dirt Rocket MX500, MX650, and SX500 electric dirt bike. This brake caliper fits both front and back wheels. For versions with 2mm thick brake rotors. Older versions have 2mm thick brake rotors and newer versions have 3mm thick brake rotors. A 5 cent nickel is approximately 2mm thick and can be used to determine the rotor's...

Aftermarket Controller for Minimoto Maxii Electric Pocket Bike Plug-and-play aftermarket speed controller with adapters. View More Minimotor Maxii Parts

Twist Throttle with Power Meter for 24 Volt eZip, IZIP, Schwinn, GT, and Mongoose Electric Scooters and Bikes (5 Terminal Connector) Aftermarket replacement throttle for 24 Volt Currie, eZip, IZIP, Schwinn, Mongoose, and GT electric scooters and bicycles with 5-wire throttles. Includes matching left and right side handlebar grips. Three LED battery level indicator lights; Min, Mid, Max. 62" long throttle cable with connector. To determine the correct throttle for your electric scooter or bike...

FAGC Fuse Holder Cap

FUS-340, AGC Fuse Holder (for glass fuses)

AGC Fuse Holder with Cap and WiresFuse holder for 1/4"x1-1/4" (6x32mm) glass fuses. Suitable for electric scooters and bicycles that use 30 Amp or lower rated fuses. 15 Amp continuous duty power rating. Pre-wired with 6.3mm female end terminals. Fits 9/16" (15mm) hole. Mounting hardware included.

AGC Fuse Holder with Screwdriver Cap Fuse holder for 1/4" x 1-1/4" and 6mm x 30mm AGC glass fuses. Fits many Currie, eZip, and IZIP plastic battery packs for electric bicycles. Cap is removable with a screwdriver to install or replace the fuse.

Alarm with Key Fob and Push To Start Switch for Brushless DC Motor Speed Controllers For 36V through 48 Volt electric scooters and bikes.Electric scooter, moped, and bike alarm with two key fobs. The alarm box has a loud alarm speaker and is mountable with screws or two-sided foam tape. Wiring Directions

Alarm with Key Fobs for Brushless DC Motor Speed Controllers Compatible with 48 Volt, 60 Volt, and 72 Volt electric scooters and bikes. Electric scooter, moped, and bike alarm with two key fobs. The alarm box has a loud alarm speaker and is mountable with screws or two-sided foam tape. Includes instruction manual. Works with all of the brushless motor speed controllers we sell that have alarm connectors. Wiring Directions ...

Aluminum Motor Cog (Pulley) for eGO Electric Scooter Replaces and upgrades the original plastic motor cog (pulley).28 TeethFor 15mm wide 5m drive belts.15mm bore with flat spot, measures 13mm across at the flat spot.

Aluminum V-Brake with Brake Shoes

V-Brake For Currie Electric Bicycles (CTE-24370)

TIR-12SFF2, 12-1/2x2-1/4 AmeriTyre Street Tread Airless Flat-Free Scooter Tire (works with 23mm-26mm rims)

TIR-12SFF, 12-1/2x2-1/4 AmeriTyre Street Tread Airless Flat-Free Scooter Tire works with 22mm-24mm rims

TIR-12KFF, 12-1/2x2-1/4 AmeriTyre Knobby Tread Airless Flat-Free Scooter Tire

Amp Meter Isolation Transformer 6 Foot Extension CableCompatible with: Dual Purpose Ammeter Plus Voltmeter, 100 Amp DC Digital Amp Meter with Isolation Transformer plus 5-120 Volt DC Voltmeter

Anderson PP45 Charger Plug to 3 Prong XLR Plug Battery Charger Adapter for Electric Scooters and Bicycles Converts chargers with an Anderson PP45 plug into a 3-prong XLR plug.

Anderson PP45 Charger Plug to 3 Prong XLR Plug Battery Charger Adapter for Electric Scooters and Bicycles Converts chargers with a 3-prong XLR plug into an Anderson PP45 plug.

FUS-372, Heavy-Duty ATO Fuse Holder With 10AWG Red Power Cable

ATO Fuse Holder with 12 Gauge Red Wire

ATO Fuse Holder with 12 Gauge Red Wire and 5mm Ring Terminals

ATO Fuse Holder with 14 Gauge Red Wire

ATO Fuse Holder with 14 Gauge Red Wire and 5mm Ring Terminals

ATO Fuse Holder with 16 Gauge Red Wire In-line ATO fuse holder with wire leads and protective cap. Two 6" long 16 AWG red power cable wires.

ATO Fuse Holder with 16 Gauge Red Wire In-line ATO fuse holder with wire leads and protective cap. Two 6" long 16 AWG red power cable wires.

ATO Fuse Holder with Cap Panel mount ATO fuse holder with snap on cap. 1/4" push-on connector tab terminals on back of fuse holder. Wires can also be soldered onto the terminals on back of fuse holder. Mounts into electric scooter or bike frame or battery box. Great for moving the fuse holder to the outside of the scooter, bike, or go kart for super easy blown fuse replacement. http://www.electricscooterparts.com/fuseholders.html ...

ATO Fuse Holder with Terminals for 12-10 Gauge WireIn-line ATO fuse holder with protective cap. Crimp or solder on wire terminals for 12 through 10 AWG wire.

ATO Fuse Holder with Terminals for 14-12 Gauge WireIn-line ATO fuse holder with protective cap. Crimp or solder on wire terminals for 14 through 12 AWG wire.

AWI 5k Ohm Thumb Throttle with 3-Terminal Connector Thumb lever has soft spring tension which makes it easy to operate and reduces thumb fatigue.Enclosed throttle design keeps dust and moisture out. Includes handlebar mounting bracket and hardware. 48" long control cable.