All Parts

Search for The Parts That You Need

24 Volt 450 Watt 2400 RPM Currie Electric Scooter Motor with 11 Tooth Sprocket Specifications: 24V (DC24V), 450W, 2400RPM (R/MIN), 28A, Base Mount Rated Current: 28A Model: XYD-6D (Use model plus specifications to determine compatibility.) Powerful four brush permanent magnet design with 100% ball bearing construction. 11 tooth sprocket for #25 chain. Shaft rotation spins clockwise if you are facing the shaft. Shaft rotation reversible by reversing power leads. 14" long 12AWG power leads with...

Wire Routing Chart We install matching connectors on every part of this kit and label them so all you have to do is plug everything together. Choose the wire length options above.The motor in this kit has a 10-tooth sprocket for #420 chain. The switch on the throttle is the on-off power switch and the panel mount rocker switch is the reverse switch. Need sprockets or chain? Click below to view our full selection of sprockets and chains including custom-made wheel and axle sprockets. Sprockets...

Wire Routing Chart Select wire length options above. Kit includes 84 links (3.5 feet) of 1/2" x 1/8" (#410) chain and a master link. The motor needs to be installed so it rotates in the clockwise direction when facing the shaft end of the motor.

Wire Routing Chart We install matching connectors on every part in this kit and label them so all you have to do is plug everything together. If the handlebar switch option is selected then the handlebar switch will replace the toggle switch in the kit. The motor has a 10-tooth sprocket for #420 chain. #420 chain with master link options are available in the Choose Your Options area. The shipping weight of this kit is 90 pounds. Need more sprockets or chain? Click below to view our full...

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric bicycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit. The key switch on the THR-105K throttle turns the power on and off.

Warning: This is not a bolt-and-go electric bicycle kit which only requires a few hand tools to install. This is a DIY electric bicycle kit which requires custom installation and mounting of all the parts. All of the parts in this kit are plug-and-play with each other so there is no electrical work to do when installing this kit.  The push button switch on the THR-132 throttle turns the power on and off.

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets or chain for your...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the SWT-95 toggle switch is wired as the on/off main power switch. These functions of these switches could be changed upon request. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") bicycle chain. We have wheel and axle sprockets for #410 chain, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. Need sprockets or chain for your project? Click...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or additional chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. SprocketsAxle Sprocket Hubs Chains ...

1/2" x 1/8" (#410) chain with master link is optionally available with this kit. The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request. Need sprockets or chain? Click below to view our full selection of sprockets and chains. Sprockets Chains ...

The SWT-23 handlebar mount switch with red button is wired as the reverse switch. The key switch on the THR-105K throttle turns the power on and off. The motor in this kit has a 9 tooth sprocket for #410 (1/2" x 1/8") chain. Need an axle sprocket, axle sprocket hub, or chain to complete your project? Click below to view our full selection of sprockets, axle sprocket hubs, and chains. Sprockets Axle Sprocket Hubs Chains ...

Wire Routing The motor in this kit has a factory-installed 10 tooth sprocket for #420 chain. We carry wheel and axle sprockets, freewheels, freewheel to axle adapters, and sprocket to axle hubs which can be used with this kit. We carry an 11 tooth motor sprocket for #410 (1/2" x 1/8") bicycle chain which fits the motor in this kit and can be added to your order from this page: 11 Tooth 17mm Dual D-Bore Sprocket for 1/2" x 1/8" Bicycle Chain Need sprockets, axle hubs, freewheel to axle...