All Parts

Search for The Parts That You Need

Sprocket Hub for 3/4" Axles Made from zinc plated steel.4" OD.3/4" overall width.3/4" ID bore.3/16" keyway.Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter.Includes two setscrews.Compatible with hardware kit item # HDW-2875-316.

Sprocket Hub for 3/4" Axles Compatible with our Group 2 (G2) sprockets.Made from zinc plated steel.2-1/8" outside diameter.3/4" ID bore. 3/16" keyway. Three 1/4" ID sprocket mounting holes with 1.687" bolt circle diameter (BCD). Sprocket mounting holes are not threaded and work with 1/4" nuts and bolts. Setscrew is on opposite side of keyway.Includes one setscrew.

Sprocket Hub for 3/4" Axles Made from zinc plated steel.4" OD.3/4" overall width. 5/8" ID bore.3/16" keyway.Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter.Includes two setscrews.Compatible with hardware kit item # HDW-2875-316.

Sprocket Hub for 5/8" Axles Compatible with our Group 2 (G2) sprockets.Made from zinc plated steel.2-1/8" outside diameter.5/8" ID bore. 3/16" keyway. Three 1/4" ID sprocket mounting holes with 1.687" bolt circle diameter (BCD). Sprocket mounting holes are not threaded and work with 1/4" nuts and bolts. Setscrew is on opposite side of keyway.Includes one setscrew.

Sprocket Hub Hardware Kit for 1" and 1-1/4" Axles Four 3/8" OD x 3/4" long socket head bolts with lock nuts. One 1/4" x 1/4" x 3/4" key pin. Compatible with item # HUB-201100 and HUB-201114.

Sprocket Hub Hardware Kit for 5/8" and 3/4" Axles Four 3/8" OD x 3/4" long socket head bolts with lock nuts. One 3/16" x 3/16" x 3/4" key pin. Compatible with axle hubs item # HUB-201058 and HUB-201034.

Sprocket Mounting Bolts and Locknuts for 5-Hole Freewheels Set of five quantity M5x0.8 x 16mm long bolts and five quantity M5x0.8 locknuts.Compatible with 5-hole freewheel item # FWM-205.

Sprocket to Freewheel Nut and Bolt Set for F8 Mounting Pattern Set of four M8x24mm 8mm bolts and four M8 8mm nylock nuts. Compatible with FWM-164 Rear Axle or Wheel Freewheel Clutch and sprockets with F8 Sprocket Mounting Pattern

Sprocket to Freewheel Nut and Bolt Set Stainless steel bolt and locknut hardware set used for attaching sprockets to freewheel clutches. Includes four bolts and four locknuts.

12 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher RelayTurn signal flasher relay for electric scooters, bikes, and pocket bikes with 12 Volt lighting systems. Works with Incandescent and LED bulbs.Silent flasher without beeper. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1-3/8" x 1-3/8" x 1" excluding terminals and mounting tab.

12 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, bikes, and pocket bikes with 12 Volt lighting systems. Works with Incandescent and LED bulbs. Built-in beeper sounds when turn signals are blinking. 1/4" (6.3mm) wide tab terminals for push-on terminals or connector. Dimensions of flasher are 1-3/4" x 1-3/8" x 1" excluding terminals and mounting tab. ...

36 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, bikes, and pocket bikes with 36 Volt lighting systems. Works with Incandescent and LED bulbs.Silent flasher without beeper.1/4" (6.3mm) wide tab terminals for push-on connectors.Dimensions of flasher are 1-3/8" x 1-3/8" x 1" excluding terminals and mounting tab. ...